We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular network device with external antenna 61 x 26 x 18mm

Manw

Manw Elfin-EW11A-0 bedroom accent 61 x 26 x 18mm

SKU CH-SWE9-T02NH

A compact serial server converts RS485 devices to Wi-Fi with TCP/IP stack and AES encryption in a 61 x 26 x 18 mm module

  • Compact serial-to-WiFi bridge for tight installations
  • 61 x 26 x 18 mm footprint fits confined spaces
  • RS485 interface links legacy gear to wireless networks
  • Embedded TCP/IP stack with AES encryption secures data
  • Remote configure and monitor via IOTService platform

Purpose & Audience

The Manw Elfin-EW11A-0 is a compact serial-to-WiFi converter built for engineers integrating RS485 devices into wireless networks. It suits industrial control, smart grid and remote monitoring projects where a small footprint matters.

Deciding Specification

The unit provides an RS485 interface bridged to WiFi with an external antenna and a full TCP/IP stack in a 61 x 26 x 18mm enclosure. AES encryption and an embedded web server are included for secure configuration.

Installation & Common Issues

Wiring uses a standard RJ45 connector for the RS485 side and the external antenna attaches directly. Setup is done through the embedded web server. The small form factor leaves little room for cable strain relief, so secure the cables to avoid dislodging the connections.

Highlights

  • Compact serial-to-WiFi bridge for tight installations
  • 61 x 26 x 18 mm footprint fits confined spaces
  • RS485 interface links legacy gear to wireless networks
  • Embedded TCP/IP stack with AES encryption secures data
  • Remote configure and monitor via IOTService platform

Specifications

BrandManw

Questions about this item

What does the 61 x 26 x 18 mm footprint mean for fitting it inside an enclosure?

The module occupies a 61 by 26 by 18 mm volume, so it fits in tight industrial housings or DIN-rail carriers without crowding adjacent terminals.

Which wired interface does the RS485 port use and what throughput ceiling does it impose?

The RS485 interface links serial devices to the Wi-Fi stack; its practical throughput is limited by the serial baud rate you configure, not by the wireless link.

How is the unit mounted given its 18 mm depth?

At 18 mm deep the board can be secured with standoffs, DIN-rail clips or adhesive pads inside a cabinet, leaving ample clearance for the external antenna.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.