We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Manfrotto detachable sliding carriage with four wheels and 5/8 inch spigot

Manfrotto

Manfrotto Detachable Sliding Carriage 5/8 Spigot FF3228

SKU CH-FE0V-W0DS7

Detachable sliding carriage with four wheels and a 5/8" spigot inserts at any point on a rail for flexible lighting rigs

  • Insert at any point on the rail for flexible positioning
  • Unscrew the wheel plate to add a carriage to an assembled rail
  • Free-sliding mechanism delivers smooth movement along the track
  • Four wheels and a 5/8" spigot support standard lighting loads
  • Compatible with Manfrotto rail systems using part numbers 927 and 3228

Versatile Rail Carriage

This detachable sliding carriage inserts at any point on a rail system, giving photographers and videographers the freedom to customise their lighting or camera support layout. Its four-wheel design rolls smoothly along the track, while the standard 5/8" spigot accepts a wide range of studio heads, arms and accessories. The wheel plate unscrews easily, so the carriage can be added to an already assembled rail without dismantling the whole setup. It suits professionals and hobbyists who need flexible, repositionable mounting points.

Sustained Load Behaviour

The carriage is engineered for normal studio loads and a free-sliding mechanism that remains consistent during extended shoots. Because the wheels run on precision bearings, friction does not increase noticeably as the carriage travels back and forth over long takes. The detachable wheel plate stays secure under continuous vibration from moving lights or camera rigs, preventing unwanted play that could affect framing. It delivers repeatable, quiet movement for the duration of a production day.

5/8 Inch Spigot Compatibility

The single specification that determines fit is the 5/8 inch spigot, the industry-standard thread for grip heads, boom arms and lighting fixtures. If your rail system and accessories use this thread size, the carriage integrates directly; if your gear relies on a different mounting standard, an adapter will be required. No other dimension or feature overrides this compatibility requirement.

Highlights

  • Insert at any point on the rail for flexible positioning
  • Unscrew the wheel plate to add a carriage to an assembled rail
  • Free-sliding mechanism delivers smooth movement along the track
  • Four wheels and a 5/8" spigot support standard lighting loads
  • Compatible with Manfrotto rail systems using part numbers 927 and 3228

Specifications

No published specifications for this item yet.

Questions about this item

Will the four-wheel carriage run silently on a studio rail during long takes?

The free-sliding mechanism with four wheels is engineered for smooth movement, so it adds no motor noise or vibration while the rail is in use.

What existing rail system do I need before this carriage can be mounted?

It inserts directly at any point on a compatible Manfrotto rail, so you must already have that rail installed in your studio.

Can I add this 5/8" spigot carriage to a rail that already has other heads attached?

Yes, the detachable wheel plate unscrews so the carriage can be dropped onto an assembled rail without removing existing hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.