We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange ABS filament spool 1.75 mm 1 kg new

MakerBot

MakerBot MP01978 True Orange 1.75 mm ABS Filament 1 kg

SKU CH-5ATG-252WJ MPN MP01978

1 kg spool of 1.75 mm True Orange ABS filament for MakerBot Replicator 1, Replicator 2X and Thing-O-Matic Stepstruder MK6+ printers

  • ColorTrue Orange
  • MaterialABS plastic
  • Diameter1.75 mm
  • Melting Point1Amorphous, no "true" melting point
  • Compatible SystemMakerBot 3D Printers: Replicator 1 Replicator 2X Thing-O-Mat
  • FeaturesSpool Diameter: 8 in Spool Width: 3 in Spool Hub Hole: 2 in
  • 1 kg spool keeps long prints running without a filament change
  • 75 mm diameter feeds cleanly through Replicator and Thing-O-Matic extruders
  • ABS material withstands 105 °C glass temperature for functional parts
  • True Orange colour delivers vivid, consistent prints every time
  • 20 lb net weight matches the 1 kg spec for accurate material planning

Filament for MakerBot printers

This 1 kg spool of True Orange ABS plastic is made for MakerBot Replicator 1, Replicator 2X and Thing-O-Matic Stepstruder MK6+ machines. The 1.75 mm diameter filament feeds directly into the supported extruders without modification. It arrives new on an 8 in spool with a 2 in hub hole.

Makers with listed MakerBot models

Owners of the named Replicator and Thing-O-Matic printers can load this spool and print immediately. Users of other printer brands or different filament diameters cannot use this material. The amorphous melting behaviour and 230 °C nozzle temperature are tuned for these specific systems.

1.75 mm diameter spec

The single specification that decides fit is the 1.75 mm filament width required by the compatible MakerBot extruders. The spool provides 1 kg of ABS plastic with a glass temperature of 105 °C and a nozzle temperature of 230 °C. Verify your printer accepts 1.75 mm filament before purchasing.

Highlights

  • 1 kg spool keeps long prints running without a filament change
  • 75 mm diameter feeds cleanly through Replicator and Thing-O-Matic extruders
  • ABS material withstands 105 °C glass temperature for functional parts
  • True Orange colour delivers vivid, consistent prints every time
  • 20 lb net weight matches the 1 kg spec for accurate material planning

Specifications

BrandMakerbot
ModelMP01978
ColorTrue Orange
MaterialABS plastic
Diameter1.75 mm
Melting Point1Amorphous, no "true" melting point
Compatible SystemMakerBot 3D Printers:
Replicator 1
Replicator 2X
Thing-O-Matic Stepstruder MK6+ and Up
FeaturesSpool Diameter: 8 in
Spool Width: 3 in
Spool Hub Hole: 2 in
Glass Temperature: 221° F / 105° C
Melting Temperature: Amorphous (no true melting point)
Nozzle Temperature: 446° F / 230° C
Weight2.20 lbs. (1 kg)
Shipping weight1.35 kg
Package size272 × 251 × 89 mm

Questions about this item

How do I load the 1.75 mm ABS spool onto the Replicator 2X without the filament snapping?

Mount the 8 in diameter spool on the holder so the 2 in hub hole seats fully, then feed the 1.75 mm strand straight into the extruder inlet; the step users miss is pre-heating the nozzle to 230 °C before the first pull so the amorphous ABS softens instead of cracking.

When will this 1 kg spool need replacing during regular printing?

A 1 kg spool lasts until the 2.20 lb supply is exhausted; replacement timing depends entirely on part volume and infill percentage, so weigh the spool periodically and swap when the remaining filament no longer covers the next job.

What temperature limit appears first during a long print with this True Orange ABS?

The glass transition at 105 °C (221 °F) is reached before any true melting point, so sustained bed or chamber heat above that level will cause the amorphous ABS to soften and lose dimensional accuracy first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.