Mag-Mate
Mag-Mate Inspection Mirror 7-1/4" to 37" 318HVO
Telescoping inspection mirror extends from 7-1/4 to 37 inches with a glass mirror and nylon head
- MaterialGlass Mirror, Nylon Head
- Extends to 37 inches for hard-to-reach viewing
- Glass mirror gives a clear, undistorted reflection
- Nylon head resists corrosion in damp conditions
- Compact 18-inch retracted length fits in a tool bag
- Listed by the manufacturer in 2020
Inspection Mirror for Tight Spaces
The Mag-Mate 318HVO extends from 18 inches to 37 inches, letting technicians view hidden areas without disassembly. A glass mirror mounted in a nylon head provides a clear reflection while resisting corrosion. The telescopic shaft locks at the needed length for stable positioning during automotive or machinery checks.
Adjustable Reach Defines Fit
The single specification that decides suitability is the 18 to 37 inch extension range. If the target area sits deeper than 37 inches from your access point, this mirror cannot reach it. Conversely, jobs requiring a fixed short handle will find the collapsed length longer than a dedicated stubby tool.
Covers Common Engine Bays and Chassis Gaps
At full extension the mirror comfortably handles most engine-compartment fasteners, exhaust routing checks and under-dash wiring inspections. It runs out when inspecting deep transmission bell-housings, long HVAC duct runs or any cavity exceeding the 37-inch limit.
Highlights
- Extends to 37 inches for hard-to-reach viewing
- Glass mirror gives a clear, undistorted reflection
- Nylon head resists corrosion in damp conditions
- Compact 18-inch retracted length fits in a tool bag
- Listed by the manufacturer in 2020
Specifications
| Brand | Mag-mate |
|---|---|
| Material | Glass Mirror, Nylon Head |
Questions about this item
How far does the 37 inch reach extend inside a real machine?
The handle telescopes from 7-1/4 inches to 37 inches so you can inspect deep cavities without disassembly.
What does the nylon head allow the mirror to do at the joint?
The nylon head provides a durable swivel that holds the glass mirror at the angle you set.
What clearance does the 7-1/4 inch collapsed length need to fit in a toolbox?
At its shortest the mirror measures 7-1/4 inches long, fitting in most standard tool trays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
