Mag-Mate
Mag-Mate CL2200 lifting magnet 2200 lb capacity 11 1/4 in length
Lifts flat steel up to 2200 lb with a pry-off handle and 11 1/4 in magnet length
- 2200 lb flat load capacity for heavy steel handling
- Pry-off handle with non-marring roller protects surface finish
- Activates on material 3/16 in thick or greater
- 11 1/4 in magnet length covers broad workpieces
- 16 in handle provides strong leverage for release
Mag-Mate CL2200 lifting magnet
The Mag-Mate CL2200 is a permanent lifting magnet rated for a 2200 lb maximum flat load capacity. It is designed for material-handling tasks in fabrication shops, warehouses and job-site steel yards where flat ferrous plate needs to be moved without slings or clamps. The pry-off handle with a non-marring roller allows single-operator engagement and release. Buyers who need to lift round bar, pipe or any non-flat profile cannot use this magnet because the manufacturer lists round capacity as not applicable.
Pre-lift checks for the CL2200
Verify that the steel plate is at least 3/16 in thick before attempting to activate the magnet; thinner material will not generate enough flux for a secure hold. For the rated 2200 lb capacity the plate must be 3 in thick or greater, so confirm the actual thickness of your workpiece before planning the lift. Ensure the contact surface is clean, flat and free of paint, rust or debris that would create an air gap and reduce holding force. Do not use the magnet on non-ferrous metals such as aluminium, copper or stainless steel.
Build integration for the CL2200
The magnet body measures 11 1/4 in long, 9 3/4 in wide and 2 1/2 in high with an overall height of 7 in including the bail, so the crane or hoist hook must accommodate a 3 in by 2 7/8 in inside bail dimension. A 16 in handle provides leverage for manual pry-off once the load is landed, clearing the operator's hands from the pinch zone. The unit requires no external power, hydraulic lines or battery packs, freeasing up the lifting device’s electrical circuit and eliminating charge-time delays between lifts.
Highlights
- 2200 lb flat load capacity for heavy steel handling
- Pry-off handle with non-marring roller protects surface finish
- Activates on material 3/16 in thick or greater
- 11 1/4 in magnet length covers broad workpieces
- 16 in handle provides strong leverage for release
Specifications
| Brand | MAG-MATE |
|---|
Questions about this item
What comes with the Mag-Mate CL2200 lifting magnet and what must be purchased separately?
The magnet includes a pry-off handle with non-marring roller and a bail sized 3 in by 2 7/8 in for hook attachment. No chain or sling is included.
Which version or capacity of the CL2200 should I choose for my application?
This model provides a 2200 lb flat load capacity and requires a minimum material thickness of 3 in for full rating; round load capacity is not applicable.
What does the 2200 lb capacity mean when the magnet is on a real workpiece?
The 2200 lb rating applies only to flat steel at least 3 in thick; on 3/16 in material the magnet will release at a lower force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
