Macromatic
Macromatic TR-6132U Time Delay Relay 100 hr Max Setting
A retriggerable one-shot timing relay with 0.05 sec to 100 hr adjustment, 24–240 V AC or 12–125 V DC coil, and 10 A DPDT contacts in an 11-pin octal plug-in base
- Wide 24–240 V AC and 12–125 V DC coil range simplifies stock
- Adjustable 0.05 s to 100 hr timing covers diverse delay needs
- DPDT 10 A contacts switch loads directly without extra contactors
- Plug-in octal base with 11 pins enables quick panel installation
- Low 1.5 W / 2.0 VA draw reduces panel heat load
Function and voltage range
This Macromatic TR-6132U is a single-function time delay relay operating as a retriggerable one-shot watchdog timer. It accepts coil voltages from 24 to 240 volts AC and 12 to 125 volts DC, making it suitable for mixed-voltage control panels. The unit mounts via an 11-pin octal plug-in base for quick installation.
Suited for watchdog timing.
Engineers needing a retriggerable one-shot function with a wide adjustment range will find this relay fits the requirement. The timer adjusts from 0.05 seconds up to four days and four hours using a built-in potentiometer. Applications that demand a local status indicator should consider other models because none is provided on this unit.
DPDT contacts rated 10 amps
The relay provides double-pole double-throw contacts rated at 10 amps at 240 volts AC and 10 amps at 30 volts DC. Power consumption is 1.5 watts or 2.0 volt-amperes. This contact rating is the key specification to verify against the load the relay will switch.
Highlights
- Wide 24–240 V AC and 12–125 V DC coil range simplifies stock
- Adjustable 0.05 s to 100 hr timing covers diverse delay needs
- DPDT 10 A contacts switch loads directly without extra contactors
- Plug-in octal base with 11 pins enables quick panel installation
- Low 1.5 W / 2.0 VA draw reduces panel heat load
Specifications
| Brand | MACROMATIC |
|---|
Questions about this item
What is the maximum time setting available on this relay?
The relay offers a maximum time setting of 4 days and 4 hours, which equals 100 hours total, adjustable via the potentiometer.
How does the 10 A contact rating apply to AC and DC circuits?
The DPDT contacts switch 10 A at 240 V AC or 10 A at 30 V DC, so the same current rating covers both voltage types.
What plug-in base and pin count does the TR-6132U use?
It uses an octal plug-in base with 11 pins for standard socket mounting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
