Macromatic
Macromatic CAP10AD68 Current Sensing Relay 24VAC
Monitors AC current from 0.10 to 10.00 A and switches a 10 A SPDT relay at 24 VAC control voltage
- Monitors AC current from 0.10 to 10.00 A with adjustable trip point
- SPDT relay switches 10 A at 240 V AC or 8 A at 28 V DC
- Operates on 24 V AC control voltage for low-voltage panels
- Built-in LED status indicator gives instant visual confirmation
- Trip delay adjustable from 0.10 to 10 sec prevents nuisance tripping
What this relay does
The Macromatic CAP10AD68 is a current sensing relay that monitors AC load current through an internal core and switches an SPDT output when the trip point is reached. It operates on 24V AC control voltage and suits panels that need automatic load monitoring without external current transformers.
How the adjustable range
The trip point adjusts from .10 to 10.00A and the trip delay spans .10 to 10 sec so the same unit covers light and heavy loads without swapping parts. A status LED shows the output state and a terminal strip provides wiring access for quick commissioning.
The specification that decides fit
The relay contacts are rated 10A at 240V AC and 8A at 28V DC so the switched circuit must stay within those limits. Buyers who need higher contact ratings or a different control voltage cannot use this part.
Highlights
- Monitors AC current from 0.10 to 10.00 A with adjustable trip point
- SPDT relay switches 10 A at 240 V AC or 8 A at 28 V DC
- Operates on 24 V AC control voltage for low-voltage panels
- Built-in LED status indicator gives instant visual confirmation
- Trip delay adjustable from 0.10 to 10 sec prevents nuisance tripping
Specifications
| Brand | MACROMATIC |
|---|
Questions about this item
Will the internal sensor opening need cleaning or replacement over time?
The relay uses an internal core for current sensing with no moving parts in the sensor opening, so no routine cleaning or replacement is required.
What is the highest current the adjustable trip point can monitor before the relay acts?
The trip point is adjustable up to 10.00A, which is the maximum sensing amp range for this relay.
Does the LED status indicator add noticeable heat when the relay runs continuously on 24V AC?
The LED draws minimal power and the relay is rated for 10A at 240V AC or 8A at 28V DC, so heat from the indicator is negligible during all-day operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
