M.A. Ford
M.A. Ford Twister Xd Drill 12X-25X Coolant Fed 9.00Mm
Coolant-fed Twister Xd drill handles 12X to 25X depths at 9.00 mm diameter
- Twister Xd drill handles deep holes with 12X-25X reach
- Coolant-fed design clears chips for cleaner drilling
- 00 mm diameter suits precise machining tasks
- M.A. Ford branding signals professional-grade tooling
- California Prop 65 notice included for safety compliance
Twister Xd Drill 12X-25X 9.00Mm
The M.A. Ford Twister Xd drill is a coolant-fed cutting tool designed for deep-hole drilling at 12X to 25X diameter depths. It serves machinists and production engineers who need reliable chip evacuation in demanding materials. The 9.00 millimetre diameter suits precise hole-making operations.
Upgrade from standard-length drills
This drill replaces conventional twist drills that cannot reach 12X to 25X depth-to-diameter ratios without pecking cycles. The jump is worth it when cycle time, hole straightness or tool life suffer from inadequate coolant delivery in deep holes. Internal coolant channels flush chips continuously.
Check machine and holder compatibility
Verify that your machine spindle and tool holder accept a 9.00 millimetre shank with through-coolant capability. Confirm coolant pressure and flow meet the demands of 12X to 25X depth drilling. Review the California Proposition 65 notice regarding listed chemicals before use.
Highlights
- Twister Xd drill handles deep holes with 12X-25X reach
- Coolant-fed design clears chips for cleaner drilling
- 00 mm diameter suits precise machining tasks
- M.A. Ford branding signals professional-grade tooling
- California Prop 65 notice included for safety compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What spindle and coolant setup does the 9.00 mm Twister Xd drill require?
It needs a holder that accepts a 9.00 mm shank and a through-spindle coolant supply capable of feeding the internal channels at the pressure your machine recommends for 12X-25X depth holes.
Which step is most often missed when installing this coolant-fed drill?
Failing to verify that the coolant passages are clear and that the machine’s coolant filter is clean before the first hole, which starves the 12X-25X drill of lubrication at depth.
When should the 2XDCE3543A drill be replaced?
Replace it when flank wear reaches the limit your shop sets for 9.00 mm carbide drills or when hole quality and thrust force indicate the cutting edges are no longer effective.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
