M.A. Ford
M.A. Ford Twister XD Drill 12X-25X Coolant Fed 7.60mm
Twister XD coolant-fed drill operates at 12X-25X speeds with 7.60mm diameter
- Twister XD drill reaches 12X-25X depth for deep-hole drilling
- 60 mm diameter suits precise hole sizing
- Coolant-fed design delivers fluid to cutting zone
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning discloses chemical hazards
M.A. Ford Twister XD Drill
The M.A. Ford Twister XD drill is a solid-carbide cutting tool designed for high-performance drilling in demanding materials. It suits machinists and manufacturers who need precise, deep-hole capability with internal coolant delivery. The 7.60 mm diameter matches specific hole-size requirements in production environments.
12X-25X Diameter Depth Range
This drill covers a depth-to-diameter range of 12X to 25X, so holes deeper than 25 diameters fall outside its practical limit. The coolant-fed design helps evacuate chips within this window, but longer unsupported lengths can reduce stability and tool life. Users must match the programmed depth to this specified range.
7.60 mm Fixed Diameter
The single specification that decides fit is the 7.60 mm cutting diameter; the tool cannot be resized or used for other hole sizes. Select this drill only when the finished hole must be exactly 7.60 mm and the depth requirement sits between 12X and 25X diameter.
Highlights
- Twister XD drill reaches 12X-25X depth for deep-hole drilling
- 60 mm diameter suits precise hole sizing
- Coolant-fed design delivers fluid to cutting zone
- M.A. Ford brand backs professional-grade tooling
- California Proposition 65 warning discloses chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Twister XD drill diameter should I select for a 7.60 mm hole?
The 7.60 mm diameter matches the hole size directly; choose this variant when the finished hole must be 7.60 mm.
What does the 12X-25X depth range mean when the drill is in the machine?
It indicates the drill can produce holes from 12 to 25 times the 7.60 mm diameter, so usable depth scales with the diameter you are cutting.
How does the coolant-fed design affect the drilling standard I can achieve?
Coolant delivered through the tool allows consistent performance at the deeper end of the 12X-25X range without relying on external flood coolant.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
