M.A. Ford
M.A. Ford Twister XD 7X+ Coolant Fed Drill No 24
A coolant-fed drill in size 24 for efficient chip removal during deep-hole drilling
- Coolant-fed design clears chips efficiently during deep drilling
- 7× diameter reach handles extended holes in one pass
- Twister XD geometry resists wear in tough materials
- No 24 sizing targets specific hole requirements
- California Proposition 65 warning notes chemical hazards
Product Identity
The M.A. Ford Twister XD 7X+ Coolant Fed Drill No 24 is a new cutting tool built for high-performance drilling in industrial applications. It integrates internal coolant delivery to manage heat and improve chip evacuation during deep-hole operations. Professional machinists and CNC operators gain consistent hole quality and extended tool life in demanding materials.
Upgrade Path
This drill replaces conventional twist drills that rely on external flood coolant or lack through-tool coolant channels. The jump is worth it when cycle times are limited by chip packing, overheating or premature wear on deep holes. Shops running high-volume production or difficult alloys see measurable gains in process reliability and reduced tool-change frequency.
Compatibility Check
Verify that your machine spindle and tool holder support through-coolant delivery at the required pressure and flow rate. Confirm the shank style matches your holder interface and that the workpiece material suits the drill geometry. California Proposition 65 warnings apply; review safety data sheets and ensure proper ventilation and personal protective equipment are in place.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 7× diameter reach handles extended holes in one pass
- Twister XD geometry resists wear in tough materials
- No 24 sizing targets specific hole requirements
- California Proposition 65 warning notes chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What size collet or chuck does the No 24 drill require?
The No 24 drill uses a standard shank that fits a matching collet or chuck for that size.
How is the coolant fed through the Twister XD 7X+ during installation?
Connect the coolant supply to the drill's internal feed port before securing it in the holder.
When should the No 24 drill be replaced under normal use?
Replace the drill when cutting edges show wear or when hole tolerance falls outside spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
