M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 9.40mm 2XDCL3701A
Coolant-fed drill delivers internal lubrication for deep-hole drilling at 9.40mm diameter
- Coolant-fed design clears chips efficiently during deep drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 notice informs safe handling practices
M.A. Ford Twister Xd 7X+ Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill built for high-performance drilling in demanding industrial environments. It delivers precise 9.40 mm holes with extended tool life through efficient coolant delivery. Professional machinists and manufacturing engineers rely on it for consistent accuracy in tough materials. This new tool arrives ready for immediate use in CNC machines or rigid drill presses.
Who this suits and who should look elsewhere
This drill suits production shops running deep-hole cycles in steel, titanium or high-temperature alloys where through-coolant capability is essential. It fits holders that accept coolant-fed shanks and machines with high-pressure coolant systems. Buyers needing a standard twist drill without coolant channels or those working in handheld applications should consider other tooling. Operations without through-spindle coolant supply cannot use this design effectively.
The 9.40 mm diameter decides fit
The single specification that determines compatibility is the 9.40 mm cutting diameter. Your hole tolerance, workpiece material and machine capacity must align with this exact size. The 7X+ designation indicates a length-to-diameter ratio optimised for deep drilling stability. Verify your holder clearance and coolant pressure match the tool requirements before ordering.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 40 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford brand delivers professional-grade tool reliability
- California Proposition 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What spindle or chuck size does the 9.40 mm Twister Xd 7X+ drill shank require?
The drill has a 9.40 mm cutting diameter and is designed for coolant-fed holders that accept a matching 9.40 mm shank. Check your machine's holder specification for exact fit.
How do I connect the coolant feed on the 2XDCL3701A drill, and what step is often missed?
Route coolant through the holder's internal channel into the drill's axial hole; the step often missed is verifying seal integrity at the holder–drill interface before starting the cycle.
When should the 9.40 mm Twister Xd 7X+ drill be replaced or reconditioned?
Replace or regrind when flank wear reaches the manufacturer's wear limit, when hole size drifts beyond tolerance, or when coolant flow drops due to internal blockage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
