M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 9.10mm 2XDCL3583A
Coolant-fed drill bit, 9.10 mm diameter, designed for deep-hole drilling with internal lubrication
- Coolant-fed design clears chips efficiently
- 7X+ length enables deeper holes in one pass
- 10 mm diameter suits precise drilling tasks
- M.A. Ford brand signals professional tool quality
- California Proposition 65 warning informs safe handling
Twister Xd 7X+ Coolant-Fed Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill bit designed for high-performance drilling operations. It features a 9.10mm cutting diameter suited for precision hole-making in demanding materials. The tool is supplied new and ships directly from the manufacturer.
Coolant-Fed Design and Application
Internal coolant channels deliver cutting fluid directly to the drill point, improving chip evacuation and temperature control during deep-hole drilling. This design change extends tool life and maintains dimensional accuracy in tough alloys. The 7X+ geometry supports aggressive feed rates in production environments.
Suited for CNC and Production Machining
This drill suits CNC machinists and production shops running deep-hole cycles in steel, stainless steel or high-temperature alloys where through-coolant capability is required. Shops without through-spindle coolant supply or those needing larger diameters should look at alternative tooling.
Highlights
- Coolant-fed design clears chips efficiently
- 7X+ length enables deeper holes in one pass
- 10 mm diameter suits precise drilling tasks
- M.A. Ford brand signals professional tool quality
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should I inspect or replace the coolant-fed drill bit when drilling 9.10 mm holes?
Inspect the cutting edges after each job; replace the bit when flank wear reaches the limit marked on the shank or when hole tolerance drifts beyond spec.
What is the first limiting factor during continuous drilling with the Twister Xd 7X+ at 9.10 mm?
Chip evacuation through the coolant channels becomes the bottleneck once the flute fills, forcing a reduction in feed rate to maintain hole quality.
How much heat and noise does the 2XDCL3583A generate in all-day production runs?
Expect elevated spindle temperatures and a steady high-pitched whine; flood coolant keeps the bit under 65 °C while the machine enclosure dampens most airborne noise.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
