M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 8.40 mm
Coolant-fed drill bit delivers internal lubrication for deep-hole drilling at 8.40 mm diameter
- Coolant-fed design clears chips efficiently during deep drilling
- 7X+ geometry maintains accuracy at extended lengths
- 40 mm diameter suits precise hole-making tasks
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 warning indicates chemical safety awareness
Application
The M.A. Ford Twister Xd 7X+ is a coolant fed drill with an 8.40 mm cutting diameter designed for high performance drilling in demanding materials. It suits machinists and maintenance teams who need reliable hole production with internal coolant delivery.
Setup check
Verify that your machine spindle accepts the drill shank and that the coolant system can supply fluid through the tool at the required pressure. Confirm the workpiece material matches the geometry and coating limits outlined by M.A. Ford for the 2XDCL3307A series.
Build fit
The through coolant design removes the need for external flood lines and clears chips efficiently from deep holes. This frees up space around the workpiece and reduces cycle time by combining drilling and cooling in a single pass.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 7X+ geometry maintains accuracy at extended lengths
- 40 mm diameter suits precise hole-making tasks
- M.A. Ford construction delivers reliable cutting performance
- California Proposition 65 warning indicates chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What is included with the Twister Xd 7X+ Coolant Fed Drill and what must I purchase separately?
The box contains the 8.40 mm coolant-fed drill, model 2XDCL3307A. Coolant supply, tool holder and workpiece clamping are not included and must be sourced separately.
How do I choose the correct version of the 2XDCL3307A drill for my application?
The 2XDCL3307A is a single 8.40 mm diameter variant. Select it when the hole size matches 8.40 mm; other diameters carry different part numbers.
What does the 8.40 mm figure mean when the drill is used in a machine?
It is the nominal cutting diameter, so the drill produces an 8.40 mm hole when run at recommended speeds and feeds with coolant flowing through the internal channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
