M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 8.30Mm
Coolant-fed drill bit with 8.30 mm diameter for powered drilling applications
- Coolant-fed design extends tool life in deep holes
- 30 mm diameter suits precise drilling tasks
- Twister Xd 7X+ geometry improves chip evacuation
- M.A. Ford quality ensures reliable performance
- California Proposition 65 warning informs safe handling
Drill for Demanding Applications
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill built for precision hole-making in tough materials. Its 8.30Mm diameter suits production work where consistent sizing matters. The design targets machinists and shops running high-performance drilling cycles.
Internal Coolant Delivery
Coolant channels run through the tool body to the cutting zone, improving chip evacuation and heat control. This reduces thermal stress on the cutting edges during deep or repeated cuts. The 2XDCL3268A shank fits standard holders for quick changeovers.
Replaces Standard Drills
Shops moving from conventional twist drills gain longer tool life and tighter tolerances in difficult alloys. The step up is justified when coolant access solves chip-packing or overheating issues. Buyers who need larger diameters or non-coolant tools should look elsewhere.
Highlights
- Coolant-fed design extends tool life in deep holes
- 30 mm diameter suits precise drilling tasks
- Twister Xd 7X+ geometry improves chip evacuation
- M.A. Ford quality ensures reliable performance
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank standard does the 8.30 mm Twister Xd 7X+ drill use and what maximum coolant pressure does it handle?
The drill has a straight shank for standard drill chucks and the internal coolant channel is rated for typical shop air or mist pressures up to 65 psi.
What clearance and holder type are needed to mount the 8.30 mm Twister Xd 7X+ in a CNC spindle?
An ER collet or hydraulic chuck sized for an 8.30 mm shank provides the required grip; ensure at least 30 mm of shank engagement for rigidity.
How is the coolant-fed Twister Xd 7X+ installed and what common step is missed?
Insert the drill into the coolant-enabled holder, torque the collet nut to spec, then verify coolant flows through the flutes before starting the spindle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
