M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 5.80 mm 2XDCL2283A
Coolant-fed drill creates 5.80 mm holes with internal lubrication for efficient chip removal
- Coolant-fed design clears chips efficiently during deep drilling
- 80 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- Prop 65 notice informs safe handling practices
- New condition ensures full factory specification compliance
M.A. Ford Twister Xd 7X+ Drill 5.80 mm
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill designed for precise holemaking in demanding materials. It features a 5.80 mm cutting diameter and a 7x diameter flute length for deeper drilling capability. This new tool arrives ready for immediate use in professional machining environments.
Suited for CNC operations needing through-coolant
Machinists running high-performance drilling cycles on CNC centres will benefit from the internal coolant channel. Buyers without through-spindle coolant capability or those requiring larger diameters should consider alternative tooling. The specialised geometry targets specific high-efficiency applications rather than general-purpose hand drilling.
5.80 mm cutting diameter defines the hole size
This single dimension determines whether the drill matches the required hole specification for the current job. Verify the 5.80 mm diameter against your engineering drawing or process plan before ordering. No other size variant is included with this specific part number 2283.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 80 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- Prop 65 notice informs safe handling practices
- New condition ensures full factory specification compliance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do you install the 5.80 mm Twister Xd 7X+ coolant-fed drill and what step is often missed?
Secure the drill in a compatible holder, connect the coolant supply to the through-tool port, verify flow before starting the spindle, and confirm the 5.80 mm diameter matches the programmed tool offset.
What maintenance or replacement will the 2XDCL2283A drill need over time?
Inspect the cutting edges after each job; replace the drill when flank wear exceeds the regrind limit or if the coolant passages become restricted by debris.
What limit appears first on the 5.80 mm coolant-fed drill during sustained high-speed drilling?
Thermal expansion at the 5.80 mm cutting diameter typically reduces hole tolerance before the carbide substrate reaches its wear limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
