M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 5.30 mm
Coolant-fed drill delivers precise 5.30 mm holes for deep-hole applications
- Twister Xd 7X+ design enables deep-hole drilling
- Coolant-fed operation clears chips for cleaner cuts
- 30 mm diameter suits precise hole sizing
- M.A. Ford manufacturing delivers reliable tool performance
- California Proposition 65 warning informs safe handling
M.A. Ford Twister Xd 7X+ Coolant Fed Drill
This M.A. Ford Twister Xd 7X+ is a coolant-fed drill bit with a 5.30 mm cutting diameter. It is designed for high-performance drilling operations where through-tool coolant delivery improves chip evacuation and extends tool life. The drill suits professional machinists and maintenance teams working on demanding materials.
Who this suits and who should look elsewhere
Machinists needing a 5.30 mm hole with internal coolant supply will find this drill matches the requirement. It is not for hand-held drilling without a coolant system, for diameters other than 5.30 mm, or for applications where a solid carbide drill without coolant holes is preferred.
Deciding specification — 5.30 mm diameter
The 5.30 mm diameter is the critical dimension that determines fit for the intended hole size. Verify that your application calls for exactly this metric diameter before purchase. The tool carries California Proposition 65 warnings for cancer and reproductive harm.
Highlights
- Twister Xd 7X+ design enables deep-hole drilling
- Coolant-fed operation clears chips for cleaner cuts
- 30 mm diameter suits precise hole sizing
- M.A. Ford manufacturing delivers reliable tool performance
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 5.30 mm coolant-fed drill in my machine and what step is often missed?
Secure the shank fully in the holder, align the coolant port with the machine supply, and torque the clamping nut to spec; the step most often missed is verifying coolant flows through the tool before starting the spindle.
What maintenance or replacement will the 2XDCL2087A drill need over time?
Inspect the cutting edges after each job; regrind or replace the drill when flank wear reaches the limit, and check the internal coolant channel for blockage during routine tool changes.
What limit appears first on the Twister Xd 7X+ during sustained drilling?
The cutting edges reach their wear limit before the carbide body or coolant passages degrade, so tool life ends when flank wear exceeds the regrind threshold.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
