M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 11.60mm
Coolant-fed drill delivers precise 11.60 mm holes with internal lubrication
- 60 mm diameter drills precise holes
- 7X+ design extends tool life significantly
- Coolant-fed operation improves cutting performance
- M.A. Ford quality ensures reliable results
- Twister Xd series built for demanding applications
M.A. Ford Twister Xd 7X+ 11.60 mm Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill bit manufactured to an 11.60 mm diameter. It is designed for machining operations that require precise hole creation with integrated coolant delivery. This tool suits professional machinists and maintenance teams working on CNC equipment or rigid setups. Buyers needing a standard twist drill without through-coolant capability should select a different series.
Sustained cutting with internal coolant feed
Coolant channels run through the body of the Twister Xd 7X+ to deliver fluid directly to the cutting zone during extended cycles. This design evacuates chips efficiently and controls temperature at the drill point over long production runs. Consistent coolant pressure reduces thermal shock on the cutting edges compared with external flood methods. Workshops without high-pressure coolant systems will not gain the full benefit of this internal delivery design.
11.60 mm diameter defines the hole size
The single specification that determines fit is the 11.60 mm cutting diameter stamped on the shank. This exact size must match the engineered hole tolerance for the component being produced. No other diameter in the Twister Xd 7X+ range will satisfy a drawing that calls for 11.60 mm. Verify the print requirement before ordering to avoid scrap or rework.
Highlights
- 60 mm diameter drills precise holes
- 7X+ design extends tool life significantly
- Coolant-fed operation improves cutting performance
- M.A. Ford quality ensures reliable results
- Twister Xd series built for demanding applications
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 11.60 mm Twister Xd 7X+ generate during continuous drilling?
The coolant-fed design delivers fluid directly to the cutting zone, removing heat as it forms and keeping the tool temperature stable during extended use.
What machine setup is required to run the 2XDCL4567A coolant-fed drill?
A drilling spindle with through-coolant capability and a compatible coolant supply system are needed to feed fluid through the tool.
Will the 11.60 mm Twister Xd 7X+ fit my existing tool holders and collets?
The shank follows standard dimensions for this drill class, so it mounts in common ER collets, Weldon holders and hydraulic chucks used for 11.60 mm tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
