M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 11.30 mm
Coolant-fed drill delivers 11.30 mm holes with 7× diameter depth capability
- Coolant-fed design clears chips efficiently during deep drilling
- 30 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning informs safe handling practices
Twister Xd 7X+ coolant-fed drill
The Twister Xd 7X+ is a coolant-fed drill from M.A. Ford designed for machine shops and production environments that require through-tool lubrication. Its 11.30 mm diameter suits precision holemaking in metals where consistent coolant delivery improves chip evacuation and tool life. Buyers who need a non-coolant drill or a different diameter should look elsewhere.
Thermal load and power draw
Coolant fed through the tool body carries heat away from the cutting zone, helping to stabilise temperatures during extended cycles. The design reduces frictional heat buildup compared with external flood cooling alone. No power consumption or noise figures are provided by the manufacturer.
Build quality and daily use
The drill carries the manufacturer part number 2XDCL4449A and is supplied new. California Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm, so appropriate handling and ventilation are required. Coolant-fed shank compatibility must be verified against the machine spindle before use.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 30 mm diameter suits precise hole-making tasks
- Twister Xd 7X+ geometry enhances cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do you install the coolant-fed Twister Xd drill and what step is often missed?
Mount the drill in a rigid holder, connect coolant lines to the through-tool ports, and verify flow before starting; the step often missed is confirming coolant reaches the tip at full pressure.
What maintenance or replacement will the 11.30 mm coolant-fed drill need later?
Inspect cutting edges for wear after each job, regrind the Twister Xd geometry when diameter drops below tolerance, and replace the tool once the coolant passages show erosion or blockage.
What limit appears first on the 2XDCL4449A drill during sustained high-feed drilling?
The coolant-fed carbide body typically hits its thermal limit first, shown by discoloration at the margin, before the 11.30 mm diameter wears out of spec.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
