M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 10.80Mm
Coolant-fed Twister Xd 7X+ drill cuts 10.80 mm holes with internal lubrication
- Coolant-fed design clears chips efficiently during deep drilling
- Twister Xd 7X+ geometry reduces thrust force for smoother cuts
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures reliable tool performance
- California Proposition 65 warning informs safe handling practices
10.80 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill with a 10.80 mm cutting diameter. It is intended for machine shops and production teams that need reliable hole-making in tough materials. The through-tool coolant delivery helps manage heat and chip evacuation during deep or high-speed drilling cycles.
Sustained Load Behaviour
Continuous coolant flow through the tool body stabilises temperatures during extended cuts, reducing thermal expansion and edge wear. This allows the drill to hold size and finish over long production runs without frequent peck cycles. The design supports consistent chip removal even when drilling deep holes in stainless steels or high-temperature alloys.
Upgrade Context
This drill replaces standard twist drills that rely on external flood coolant or lack internal channels. The jump is worthwhile when hole depth exceeds several diameters, when cycle time must be reduced, or when workpiece materials generate excessive heat with conventional tooling. It is not suited for handheld drilling or machines without through-spindle coolant capability.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- Twister Xd 7X+ geometry reduces thrust force for smoother cuts
- 80 mm diameter suits precise hole-making tasks
- M.A. Ford manufacturing ensures reliable tool performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the Twister Xd 7X+ coolant-fed drill generate noticeable heat or noise during extended drilling cycles?
The coolant-fed design directs fluid through the tool to the cutting zone, which helps manage temperature and reduces friction-related noise during continuous operation.
What machine spindle or holder is required to run the 10.80 mm Twister Xd 7X+ drill?
A compatible coolant-through spindle or tool holder that accepts the drill shank and supplies high-pressure coolant is needed for proper operation.
Will the 2XDCL4252A drill work reliably in an older CNC lathe that only provides flood coolant?
Flood coolant does not deliver fluid through the drill's internal channels, so chip evacuation and tool life will be reduced compared with a through-spindle coolant system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
