M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 10.60 mm 2XDCL4173A
A coolant-fed drill bit with a 10.60 mm diameter for deep-hole drilling
- Coolant-fed design clears chips efficiently for deeper holes
- Twister Xd 7X+ geometry enhances drilling performance in tough materials
- Precise 10.60 mm diameter suits exacting applications
- M.A. Ford manufacturing ensures professional-grade tool reliability
- California Proposition 65 notice informs safe handling practices
M.A. Ford Twister Xd 7X+ Drill 10.60 mm
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill designed for precision hole-making in demanding materials. Its 10.60 mm diameter suits industrial applications requiring accurate drilling depth and efficient chip evacuation. Professional machinists and maintenance technicians use it where through-coolant delivery improves tool life and hole quality. The drill is supplied new from the manufacturer.
Suited for coolant-fed drilling operations
This drill suits workshops with machine tools that supply coolant through the spindle. It is not for handheld drilling or machines lacking through-coolant capability. Buyers needing a different diameter or a non-coolant-fed geometry should look at other options. The Proposition 65 notice indicates the product contains chemicals identified by the State of California as causing cancer and reproductive harm.
10.60 mm diameter defines the application
The single specification that decides fit is the 10.60 mm cutting diameter. It must match the required hole size and the machine tool holder capacity exactly. No other diameter or shank variation is implied by the model number 2XDCL4173A. Verify the dimension against your print or tooling requirement before ordering.
Highlights
- Coolant-fed design clears chips efficiently for deeper holes
- Twister Xd 7X+ geometry enhances drilling performance in tough materials
- Precise 10.60 mm diameter suits exacting applications
- M.A. Ford manufacturing ensures professional-grade tool reliability
- California Proposition 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 10.60 mm Twister Xd 7X+ generate during continuous drilling?
The coolant-fed design channels fluid directly to the cutting zone, carrying heat away as you drill and keeping the tool and workpiece cooler during extended runs.
What machine setup is required to use the coolant-fed feature on this drill?
You need a spindle or holder that can deliver coolant through the tool, plus a coolant supply system with sufficient pressure and filtration for the 10.60 mm diameter.
Will the 10.60 mm shank fit the collets and tool holders I already use for older drills?
The shank follows standard sizing for this diameter, so it fits existing ER collets, Weldon flats or hydraulic holders made for 10.60 mm tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
