M.A. Ford
M.A. Ford Twister Xd 7X+ Coolant Fed Drill 10.50Mm
Coolant-fed drill bit for 10.50 mm holes with internal lubrication delivery
- Coolant-fed design improves chip evacuation and tool life
- 50 mm diameter suits precise drilling applications
- Twister Xd 7X+ geometry optimises cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 notice discloses regulated chemical content
Twister Xd 7X+ Coolant-Fed Drill
The M.A. Ford Twister Xd 7X+ is a coolant-fed drill built for 10.50 mm holes in demanding materials. It serves machinists and maintenance teams who need reliable chip evacuation and tool life when drilling deep or difficult workpieces. The design targets professional metal-cutting applications where flood coolant cannot reach the cutting zone effectively.
Installation notes for through-coolant setup
Mount the drill in a holder that seals the coolant port to the spindle’s through-channel; a loose seal drops pressure and starves the flutes. Verify the machine delivers the flow rate the tool requires or chips will pack and the drill will wander. Common issues include mismatched holder seals, insufficient pump volume and running dry on the first plunge.
Sustained cutting behaviour with internal coolant
Continuous coolant flow through the 10.50 mm body stabilises edge temperature during long cuts, reducing thermal cycling that cracks carbide. Chip evacuation stays consistent hole after hole, so the drill holds size and finish without the drift seen in external-flood setups. The tool maintains performance in extended production runs where heat buildup normally forces feed reductions.
Highlights
- Coolant-fed design improves chip evacuation and tool life
- 50 mm diameter suits precise drilling applications
- Twister Xd 7X+ geometry optimises cutting performance
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 notice discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I verify the 10.50 mm Twister Xd 7X+ is cutting correctly after installation?
Run a test hole in the target material and measure the diameter; it should match the 10.50 mm spec with a clean finish and consistent coolant flow through the fed channels.
What ships with the 2XDCL4134A drill and what must I source separately?
The box contains the Twister Xd 7X+ coolant-fed drill only; you will need to supply compatible tool holders, coolant supply fittings and cutting fluid.
Which version of the Twister Xd 7X+ should I select for a 10.50 mm hole?
Choose the 2XDCL4134A model — it is the 10.50 mm variant of the Twister Xd 7X+ coolant-fed drill line.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
