M.A. Ford
M.A. Ford Twister XD 7X+ Coolant Fed Drill 10.30 mm 2XDCL4055A
Coolant-fed drill delivers 10.30 mm holes with through-tool lubrication for efficient chip removal
- Twister XD 7X+ design with coolant feed for efficient drilling
- 30 mm diameter suits precise hole-making tasks
- Coolant-fed system reduces heat buildup during operation
- M.A. Ford brand trusted for professional tool quality
- New condition ensures full factory performance and reliability
M.A. Ford Twister XD 7X+ Drill 10.30 mm
The M.A. Ford Twister XD 7X+ is a coolant-fed drill bit engineered for precision hole-making in demanding materials. Its internal coolant delivery helps manage heat and evacuate chips during deep drilling cycles. The 10.30 mm cutting diameter suits metric hole requirements in professional machining environments. This new tool arrives directly from the manufacturer.
Machinists needing through-coolant capability
Shops running CNC machines with through-spindle coolant systems will benefit from the integrated fluid channels. Operators without coolant-fed spindle capability or without appropriate coolant filtration cannot use this tool as intended. The design targets high-performance drilling rather than general-purpose handheld use. Buyers needing a standard twist drill without coolant holes should select a different series.
10.30 mm cutting diameter
The 10.30 mm diameter determines the exact hole size this drill produces. Verify that your application requires this specific metric dimension before ordering. The coolant-fed design supports deeper holes at higher parameters when paired with compatible equipment. California Proposition 65 warnings apply regarding chemical content.
Highlights
- Twister XD 7X+ design with coolant feed for efficient drilling
- 30 mm diameter suits precise hole-making tasks
- Coolant-fed system reduces heat buildup during operation
- M.A. Ford brand trusted for professional tool quality
- New condition ensures full factory performance and reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 10.30 mm diameter mean when the drill is in a CNC spindle?
The 10.30 mm cutting diameter produces a hole of that size in a single pass when the tool is held rigidly in a CNC spindle with proper run-out control.
What shank standard does the 2XDCL4055A use and what does it limit?
The drill uses a straight cylindrical shank that fits standard ER collets or hydraulic holders; the shank diameter limits the maximum tool-holder bore and therefore the smallest machine spindle that can accept it.
What physical clearance does the coolant-fed design need inside the machine?
Coolant-fed operation requires a through-spindle coolant supply or a coolant-ring adapter and enough axial clearance for the drill’s overall length plus the holder.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
