M.A. Ford
M.A. Ford Twister Xd 5X Solid Carbide Drill 6.20 mm
Solid carbide drill cuts 6.20 mm holes with 5× diameter depth capacity
- Solid carbide construction resists wear for long tool life
- 5× diameter flute length enables deep-hole drilling in one pass
- 20 mm cutting diameter matches precise hole-size requirements
- Twister Xd geometry improves chip evacuation in tough materials
- M.A. Ford manufacturing delivers consistent performance for professional use
Purpose and user
The M.A. Ford Twister Xd 5X is a solid carbide drill bit sized at 6.20 mm for precise hole-making. It targets machinists and maintenance teams who need repeatable accuracy in steel, cast iron and similar alloys.
Standard limits
The drill follows a 5X diameter flute length convention that caps its effective reach at roughly five times the nominal size. Deeper holes will require peck cycles or a dedicated deep-hole tool to maintain chip evacuation and diameter tolerance.
Setup checks
Verify that your machine spindle runs true and that the holder provides concentric grip without run-out. Confirm the workpiece material and coolant arrangement suit solid carbide so that the 6.20 mm cutting edges are not overloaded.
Highlights
- Solid carbide construction resists wear for long tool life
- 5× diameter flute length enables deep-hole drilling in one pass
- 20 mm cutting diameter matches precise hole-size requirements
- Twister Xd geometry improves chip evacuation in tough materials
- M.A. Ford manufacturing delivers consistent performance for professional use
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Twister Xd 5X drill size should I select for a 6.20 mm hole?
The 2XDSR2441A variant is ground to 6.20 mm diameter, so choose this part when that exact size is required.
What does the 5X designation mean for hole depth in practice?
5X indicates the flute length allows drilling up to five times the 6.20 mm diameter in a single pass.
What shank interface does the 2XDSR2441A use and what does it limit?
It uses a standard cylindrical shank that fits common drill chucks and collets, limiting use to holders that accept round shanks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
