M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 9.50 mm 2XDCR3740A
Twister Xd 5X coolant-fed drill cuts 9.50 mm holes with internal lubrication delivery
- 5× coolant-fed design clears chips efficiently
- 50 mm diameter suits precise drilling tasks
- Twister Xd geometry improves cutting performance
- M.A. Ford construction ensures professional reliability
- California Proposition 65 warning discloses chemical hazards
Twister Xd 5X Coolant Fed Drill
The M.A. Ford Twister Xd 5X is a coolant-fed drill built for high-performance drilling in demanding materials. Its design supports efficient chip evacuation and temperature control during deep-hole operations. This tool targets professional machinists and manufacturing environments requiring consistent precision.
Suited for deep-hole drilling with internal coolant
This drill suits users who need reliable coolant delivery directly to the cutting zone for 5X diameter depth applications. It is not for operators restricted to external flood coolant only or those drilling shallow holes where coolant-fed design adds unnecessary cost. Buyers without through-spindle coolant capability on their machine should look elsewhere.
9.50 mm cutting diameter
The drill features a 9.50 mm cutting diameter, which determines the hole size produced. Verify this exact dimension matches your required hole specification before purchase. The 2XDCR3740A part number identifies this specific diameter variant within the Twister Xd 5X series.
Highlights
- 5× coolant-fed design clears chips efficiently
- 50 mm diameter suits precise drilling tasks
- Twister Xd geometry improves cutting performance
- M.A. Ford construction ensures professional reliability
- California Proposition 65 warning discloses chemical hazards
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How deep can the 9.50 mm Twister Xd 5X drill in a single pass?
The 5X in the model name indicates a length-to-diameter ratio of five, so this drill can reach roughly five times its 9.50 mm diameter in one operation.
Does the coolant-fed design reduce heat and noise during extended drilling?
Internal coolant delivery flushes chips and draws heat away from the cutting edges, keeping the tool cooler and running quieter during long production cycles.
What machine setup is required to use the through-coolant feature?
A spindle or tool holder with through-coolant capability and a compatible coolant supply system are needed to feed fluid through the drill’s internal channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
