M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 9.30mm
Coolant-fed drill bit with 5× diameter depth capability for 9.30 mm holes
- Twister Xd 5X design drills five times diameter deep
- Coolant-fed operation clears chips and reduces heat
- 30 mm diameter suits precise hole-making
- M.A. Ford brand delivers professional-grade tooling
- Proposition 65 warning informs safe handling practice
9.30 mm Twister Xd coolant-fed drill
The M.A. Ford Twister Xd is a 9.30 mm diameter drill designed with internal coolant delivery. It targets machinists who need consistent hole quality in deep drilling operations where chip evacuation and heat control are critical.
Replaces standard twist drills without coolant feed
Conventional drills rely on external flood coolant that often fails to reach the cutting zone at depth. The internal channels on this tool direct coolant to the tip, extending tool life and allowing higher feed rates when hole depth exceeds several diameters.
Suited for CNC and manual machines
Shops without through-spindle or high-pressure coolant capability cannot use the internal feed feature. Buyers who need larger diameters, different lengths or non-coolant-fed geometries should look at other tooling options.
Highlights
- Twister Xd 5X design drills five times diameter deep
- Coolant-fed operation clears chips and reduces heat
- 30 mm diameter suits precise hole-making
- M.A. Ford brand delivers professional-grade tooling
- Proposition 65 warning informs safe handling practice
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 9.30 mm Twister Xd 5X drill need for a secure fit?
The drill has a 9.30 mm cutting diameter and a matching cylindrical shank, so it requires a collet or chuck that grips 9.30 mm exactly.
How do you connect coolant to the 2XDCR3661A drill and what step is often missed?
Feed coolant through the machine spindle into the drill's axial hole; the step often missed is verifying the coolant port is open and sealed before starting the cycle.
When should the 9.30 mm Twister Xd 5X drill be replaced based on wear?
Replace the drill when the cutting lips show visible rounding, chipping, or when hole diameter exceeds tolerance, typically after the tool life recommended for the workpiece material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
