M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 7.20 mm 2XDCR2835A
A 7.20 mm coolant-fed drill designed for five-times-diameter depth drilling
- Twister Xd design drills five diameters deep
- Internal coolant feed clears chips from deep holes
- 20 mm diameter suits precise drilling tasks
- M.A. Ford manufacture backs professional-grade durability
- California Proposition 65 warning lists cancer and reproductive risks
M.A. Ford Twister Xd 5X Coolant Fed Drill
This M.A. Ford Twister Xd drill is a coolant-fed cutting tool manufactured to a 7.20 mm diameter. It is designed for machine shops and production lines that require precise, repeatable holes in metal components. The 5X designation indicates a five-times-diameter drilling depth capability for deep-hole applications.
Sustained drilling with internal coolant delivery
Internal coolant channels deliver cutting fluid directly to the drill point, removing heat and chips during extended cycles. This continuous flow prevents thermal buildup that can dull edges or distort workpieces. Stable temperatures maintain dimensional accuracy across long production runs without frequent tool changes.
Practical limits of coolant-fed drilling
Effective chip evacuation depends on adequate coolant pressure and filtration matched to the machine spindle. Workpiece material hardness and machine rigidity constrain achievable feed rates and hole straightness. Operators must verify spindle runout and holder concentricity to avoid premature wear or tool fracture at depth.
Highlights
- Twister Xd design drills five diameters deep
- Internal coolant feed clears chips from deep holes
- 20 mm diameter suits precise drilling tasks
- M.A. Ford manufacture backs professional-grade durability
- California Proposition 65 warning lists cancer and reproductive risks
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How much heat does the 7.20 mm Twister Xd drill generate during continuous coolant-fed drilling?
The coolant-fed design actively removes heat from the cutting zone, keeping the 7.20 mm drill tip cooler during extended high-speed runs.
What machine spindle and coolant system are required to run this 2XDCR2835A drill?
You need a rigid CNC or milling spindle that accepts a 7.20 mm shank and a through-spindle coolant supply capable of delivering steady flow at operating pressure.
Will the 7.20 mm Twister Xd drill fit in the tool holders and coolant lines of an older machining centre?
The 7.20 mm shank fits standard ER or hydraulic holders, and the through-coolant hole aligns with most legacy through-spindle coolant interfaces.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
