M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 7.10mm 2XDCR2795A
A 7.10 mm coolant-fed drill bit designed for five-times-diameter deep-hole drilling
- 5x diameter reach for deeper holes in one pass
- 10 mm cutting diameter for precise sizing
- Internal coolant feed clears chips and reduces heat
- Twister XD geometry improves tool life and finish
- M.A. Ford quality backed by manufacturer direct supply
Application & Audience
The M.A. Ford Twister XD drill is a 7.10mm coolant-fed cutting tool built for machine shops running high-volume production. It targets CNC operators who need a single 5×D tool that delivers chip evacuation through internal coolant channels.
Critical Specification
The 5× diameter flute length sets the maximum hole depth this drill can reach in one pass. If your programme calls for deeper holes or a different diameter, this part number will not suit the job.
Installation & Common Issues
The shank fits standard ER collets or hydraulic holders, so setup is straightforward for any trained machinist. Problems usually arise when coolant pressure is too low to clear chips or when the workpiece material exceeds the drill’s recommended hardness range.
Highlights
- 5x diameter reach for deeper holes in one pass
- 10 mm cutting diameter for precise sizing
- Internal coolant feed clears chips and reduces heat
- Twister XD geometry improves tool life and finish
- M.A. Ford quality backed by manufacturer direct supply
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What hole size does the 7.10 mm drill produce in practice?
The drill cuts a 7.10 mm diameter hole when used in a machine with proper coolant feed and rigidity.
Which shank standard does the 2XDCR2795A use and what does it limit?
The drill uses a standard cylindrical shank that fits common drill chucks and collets, limiting use to holders that accept round shanks.
What physical clearance does the 5X length need for mounting?
The 5X flute length requires a spindle and workpiece setup that provides enough axial travel and coolant access for the full drill depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
