M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 6.90 mm
Coolant-fed twist drill cuts precise 6.90 mm holes five diameters deep
- 5x diameter drilling depth for deeper holes in one pass
- Coolant-fed design improves chip evacuation and tool life
- 90 mm diameter suits precise hole-making tasks
- Twister Xd geometry optimised for high-performance drilling
- M.A. Ford quality for reliable professional results
M.A. Ford Twister Xd Drill
The M.A. Ford Twister Xd is a 6.90 mm coolant-fed drill built for production drilling in tough materials. Its 5× diameter flute length gives the reach needed for deeper holes without pecking. The tool arrives new and ships directly from the manufacturer.
Machinists needing 5× reach with through-coolant
Shops that run high-volume steel, stainless or high-temp alloys will benefit from the coolant-fed design and extended flute. Operations limited to shallow holes or machines without through-spindle coolant should consider a shorter, non-coolant drill instead.
6.90 mm diameter with 5× flute length
The 5× geometry provides comfortable depth capacity for holes up to five diameters deep in a single pass. Chip evacuation and cooling remain effective within this range; beyond it, flute length and coolant pressure become limiting factors for reliable performance.
Highlights
- 5x diameter drilling depth for deeper holes in one pass
- Coolant-fed design improves chip evacuation and tool life
- 90 mm diameter suits precise hole-making tasks
- Twister Xd geometry optimised for high-performance drilling
- M.A. Ford quality for reliable professional results
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank type does my machine need to accept the Twister Xd 5X 6.90 mm drill?
The Twister Xd 5X Coolant Fed Drill has a straight shank that fits standard drill chucks and collets sized for 6.90 mm tooling.
Can I run this 6.90 mm drill in a holder designed for older M.A. Ford 2XD series tools?
Yes, the 2XDCR2717A shares the same straight shank geometry as earlier 2XD drills, so existing holders accept it directly.
How do I verify coolant is reaching the cutting zone on the Twister Xd 5X?
Check for steady coolant flow from the through-tool holes at the drill tip while the spindle rotates; consistent flow confirms the internal passages are clear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
