M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 6.80mm
A 6.80 mm coolant-fed drill designed for five-times-diameter drilling depth
- 5x coolant-fed design clears chips efficiently
- 80 mm diameter suits precise hole sizes
- Twister XD geometry reduces cutting forces
- M.A. Ford construction delivers professional durability
- California Prop 65 warning informs safe handling
M.A. Ford Twister XD 5X Coolant Fed Drill
This 6.80 mm coolant-fed drill is designed for machinists and maintenance teams who need deep-hole drilling with through-tool coolant delivery. The Twister XD geometry supports five-times-diameter drilling in a single pass, reducing cycle time on CNC machines and manual stations alike.
Coolant-fed drilling depth limited to five times
Through-spindle coolant is required to reach the cutting zone at this depth ratio; without adequate pressure and flow the flutes cannot evacuate chips reliably. The tool is not suited for dry drilling, flood-coolant-only setups, or applications that exceed the 5×D limit.
6.80 mm cutting diameter fixes the hole size
The nominal diameter determines the tapped or clearance hole produced, so the drill matches only operations that call for a 6.80 mm bore. Shops needing a different diameter must select another variant; this tool cannot be reground to a smaller size without losing coolant-hole integrity.
Highlights
- 5x coolant-fed design clears chips efficiently
- 80 mm diameter suits precise hole sizes
- Twister XD geometry reduces cutting forces
- M.A. Ford construction delivers professional durability
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which diameter should I pick for the Twister XD 5X Coolant Fed Drill?
The drill is supplied in a single 6.80 mm diameter, so no alternative size needs to be selected.
What does the 5X designation mean when the drill is in the machine?
5X indicates a flute length five times the 6.80 mm diameter, giving a deeper hole capacity per pass.
What shank interface does the 2XDCR2677A use and what does it limit?
The drill uses a straight cylindrical shank that fits standard drill chucks, limiting use to holders that accept round shanks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
