M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 6.10 mm
A coolant-fed drill bit with a 6.10 mm diameter for deep-hole drilling
- Twister XD design drills five diameters deep with internal coolant feed
- 10 mm cutting diameter suits precise hole-making tasks
- California Proposition 65 notice flags cancer-risk chemical content
- California Proposition 65 notice warns of reproductive-harm chemical exposure
- M.A. Ford manufacturing backs professional-grade drilling performance
6.10 mm Twister XD Coolant-Fed Drill
This M.A. Ford Twister XD drill is a 5× diameter coolant-fed tool with a 6.10 mm cutting diameter. It is designed for production drilling where through-tool coolant delivery improves chip evacuation and extends tool life in steel and alloy workpieces. The 2XDCR2402A designation identifies this specific geometry and coating package.
Machinists needing deep-hole capability in one setup
The 5× length-to-diameter ratio suits operators drilling holes up to five diameters deep without peck cycles. Shops without through-spindle coolant or without high-pressure coolant systems cannot use the internal coolant channel effectively and should choose an external-coolant or solid-carbide alternative.
6.10 mm cutting diameter fixes the hole size
The 6.10 mm diameter is the single specification that determines whether this drill produces the required hole tolerance. If the drawing calls for a different diameter — larger or smaller — this tool cannot be used and a different cutting diameter must be selected.
Highlights
- Twister XD design drills five diameters deep with internal coolant feed
- 10 mm cutting diameter suits precise hole-making tasks
- California Proposition 65 notice flags cancer-risk chemical content
- California Proposition 65 notice warns of reproductive-harm chemical exposure
- M.A. Ford manufacturing backs professional-grade drilling performance
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How can I confirm the Twister XD 5X drill is cutting correctly at 6.10 mm?
Check that the coolant flows steadily through the tool and the hole diameter measures 6.10 mm with a gauge after the first few holes.
What comes with the 2XDCR2402A drill and what must I supply?
The package contains the 6.10 mm Twister XD 5X coolant-fed drill only; you must provide a compatible tool holder and coolant system.
Which version of the Twister XD 5X should I choose for a 6.10 mm hole?
Select the 2XDCR2402A model, which is specified for a 6.10 mm diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
