M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 5.40 mm 2XDCR2126A
A coolant-fed drill with 5× diameter depth capability for 5.40 mm holes
- 5x coolant-fed design enables deep-hole drilling
- 40 mm diameter suits precision boring tasks
- Twister Xd series built for high-performance cutting
- M.A. Ford manufacturing ensures professional-grade durability
- California Proposition 65 compliance disclosed for user awareness
Product identity
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a 5.40 mm solid-carbide drill designed for high-performance holemaking in tough alloys. It targets machinists and tooling engineers who need a dedicated coolant-fed tool for deep, precise drilling cycles.
Setup checks
Verify that your machine spindle and holder can deliver coolant through the tool at the pressure required for 5X diameter drilling. Confirm the shank style matches your collet or hydraulic chuck and that the workholding provides enough rigidity for the extended length.
Sustained-load behaviour
Through-coolant delivery flushes chips continuously, preventing packing and thermal buildup during long cuts. The specialised flute geometry and coating maintain edge integrity and hole quality across repeated full-depth passes without the degradation seen in short-burst testing.
Highlights
- 5x coolant-fed design enables deep-hole drilling
- 40 mm diameter suits precision boring tasks
- Twister Xd series built for high-performance cutting
- M.A. Ford manufacturing ensures professional-grade durability
- California Proposition 65 compliance disclosed for user awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 5.40 mm Twister Xd drill include any additional accessories or coolant components?
The product is supplied as the 5.40 mm Twister Xd 5X coolant-fed drill itself.
When should I select the 5.40 mm diameter over other available sizes?
Choose the 5.40 mm diameter when the hole specification for your workpiece calls for that exact size. The 5X length provides deeper reach than shorter variants.
What does the 5X designation mean for drilling performance on the machine?
The 5X designation indicates a flute length five times the 5.40 mm diameter, allowing deeper holes in a single pass with internal coolant delivery for chip evacuation and cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
