M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 33/64
Coolant-fed drill bit sized 33/64 for efficient chip evacuation during deep-hole drilling
- Twister Xd design enables 5X drilling depth
- Coolant-fed operation clears chips from deep holes
- 33/64 inch diameter suits precise hole sizing
- M.A. Ford brand backs professional-grade performance
- California Prop 65 warning discloses regulated chemical content
Twister Xd 5X Coolant Fed Drill
The M.A. Ford Twister Xd 5X is a coolant-fed drill built for high-performance holemaking in demanding materials. Its design delivers cutting fluid directly to the point of cut to manage heat and evacuate chips efficiently. This tool suits professional machinists and maintenance teams requiring reliable deep-hole capability.
Production shops needing through-coolant drilling
Operations without through-spindle coolant supply cannot use the internal coolant channel effectively. Buyers who need a standard twist drill without coolant feed should select a different tool style. Shops focused solely on shallow holes in soft materials may find the design excessive for their needs.
33/64 inch cutting diameter
The drill cuts a precise 33/64 inch diameter hole, matching the specific size required for the application. Verify this exact dimension against your hole specification before ordering. The 5X designation indicates the length-to-diameter ratio for the intended drilling depth.
Highlights
- Twister Xd design enables 5X drilling depth
- Coolant-fed operation clears chips from deep holes
- 33/64 inch diameter suits precise hole sizing
- M.A. Ford brand backs professional-grade performance
- California Prop 65 warning discloses regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the coolant-fed drill bit so the internal channels align with the machine spindle?
Insert the 33/64 inch shank fully into the holder until the coolant port seats against the spindle face; the step often missed is rotating the flat on the shank to match the holder keyway before tightening.
What maintenance will the Twister Xd 5X drill need after extended use?
Re-sharpen the cutting edges when flank wear reaches the margin line and flush the internal coolant passages with solvent to clear metal fines that restrict flow.
At what point does chip evacuation become the limiting factor during deep-hole drilling?
Beyond five diameters deep the 33/64 inch flutes can no longer lift chips fast enough, so peck cycles or higher coolant pressure are required to prevent packing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
