M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 31/64
A 31/64-inch coolant-fed drill designed for five-times-diameter deep-hole drilling
- 5x coolant-fed design clears chips efficiently
- 31/64 inch diameter suits precise hole sizing
- M.A. Ford Twister Xd built for demanding drilling
- California Prop 65 warning informs safe handling
- Manufacturer-direct supply ensures genuine product quality
Twister Xd 5X Drill 31/64
The M.A. Ford Twister Xd 5X is a coolant-fed drill bit sized at 31/64 inch for precision holemaking. It targets machinists and maintenance teams who need reliable performance in demanding materials. The design supports high-efficiency drilling with through-tool coolant delivery. This tool suits professional workshops focused on productivity.
Upgrade from standard twist drills
Replacing conventional twist drills with this coolant-fed model becomes worthwhile when heat buildup limits speed or tool life. The internal coolant channel improves chip evacuation and temperature control in deep holes. The jump pays off in high-volume runs where cycle time and consistency matter most. Standard drills without coolant feed cannot match this capability.
Check machine and coolant setup
Verify that your machine spindle and tool holder support through-coolant operation before ordering. Confirm the 31/64 inch diameter matches the required hole specification for your application. Ensure your coolant system delivers adequate pressure and filtration for small-diameter tooling. Incompatible holders or insufficient coolant flow will prevent the drill from performing as designed.
Highlights
- 5x coolant-fed design clears chips efficiently
- 31/64 inch diameter suits precise hole sizing
- M.A. Ford Twister Xd built for demanding drilling
- California Prop 65 warning informs safe handling
- Manufacturer-direct supply ensures genuine product quality
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank size does the 31/64 inch Twister Xd drill need to fit a standard holder?
The 31/64 inch diameter shank fits directly into a matching 31/64 inch collet or drill chuck without an adapter.
How is the coolant-fed Twister Xd drill installed, and what step is often missed?
Mount the drill in the spindle, then connect the coolant supply to the tool's internal feed port; skipping the port connection starves the cutting zone.
When will the 31/64 inch Twister Xd drill need replacement?
Replace the drill when the cutting lips show visible wear, chipping, or when hole diameter exceeds tolerance for the 31/64 inch size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
