M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 3.90 mm 2XDCR1535A
Coolant-fed drill with a 3.90 mm diameter designed for 5X drilling depth
- 90 mm diameter drills precise holes
- 5X coolant-fed design improves chip evacuation
- Twister Xd geometry extends tool life
- M.A. Ford quality ensures reliable performance
- California Proposition 65 compliance disclosed for safety
Precision drilling tool
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a 3.90 mm cutting tool designed for machining operations that require through-coolant delivery. It targets professional machinists and CNC operators working with metals where chip evacuation and heat control are critical. The drill suits production environments that demand consistent hole quality at five-times-diameter depth.
5X diameter with coolant feed
The defining specification is the 5X diameter-to-depth ratio combined with internal coolant channels that feed fluid directly to the cutting zone. This configuration supports deeper holes in a single pass while managing temperature and clearing chips without peck cycles. Buyers needing a standard 3X drill or a non-coolant-fed geometry should select a different tool.
Direct machine mounting
The drill mounts directly into a compatible tool holder or spindle equipped for through-coolant supply; no adapter is included. Installation fails when the machine lacks high-pressure coolant capability or when the holder seals incorrectly, causing leakage and poor chip removal. Verify coolant-pressure requirements and holder compatibility before use.
Highlights
- 90 mm diameter drills precise holes
- 5X coolant-fed design improves chip evacuation
- Twister Xd geometry extends tool life
- M.A. Ford quality ensures reliable performance
- California Proposition 65 compliance disclosed for safety
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How does the 5X drill-point geometry affect hole quality in a machine spindle?
The 5X point reduces thrust and improves centring, giving straighter holes with less wander when the drill enters the workpiece.
What does the coolant-fed shank need from the tool holder or machine?
The shank is designed for through-coolant holders that seal on the shank and deliver fluid directly to the drill point.
What clearance does the 3.90 mm drill diameter need in the fixture or workpiece?
The 3.90 mm cutting diameter requires a pilot hole or clearance at least that large so the drill can enter without interference.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
