M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 20.00Mm
Coolant-fed Twister Xd 5X drill bores 20.00 mm holes with internal lubrication
- 5x coolant-fed design clears chips efficiently
- 00 mm diameter suits precise hole sizing
- Twister XD geometry supports high-performance drilling
- M.A. Ford brand delivers professional tool reliability
- California Proposition 65 warning indicates regulated chemical presence
20.00 mm coolant-fed drill
The M.A. Ford Twister Xd 5X is a coolant-fed drill with a 20.00 mm diameter. It is designed for metalworking professionals who need through-coolant delivery to the cutting zone. The tool suits CNC and high-volume production where chip evacuation and heat control are critical. It is not for buyers who need a smaller diameter or a non-coolant drill.
Installation and common issues
The drill fits standard holders that accept a 20.00 mm shank with coolant passages. Alignment of the coolant ports must be checked before the first cut to avoid leakage. Running without coolant flow will overheat the cutting edges and shorten tool life. Vibration indicates holder runout or insufficient clamping force.
Pre-order checks
Verify that your machine spindle and tool holder provide through-coolant capability at the required pressure. Confirm the holder accepts a 20.00 mm shank with the correct coolant port geometry. Review the Proposition 65 notice for chemical exposure information. Ensure your workpiece material and cutting parameters match the drill’s design envelope.
Highlights
- 5x coolant-fed design clears chips efficiently
- 00 mm diameter suits precise hole sizing
- Twister XD geometry supports high-performance drilling
- M.A. Ford brand delivers professional tool reliability
- California Proposition 65 warning indicates regulated chemical presence
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I confirm the 20.00 mm Twister Xd 5X drill is cutting correctly after setup?
Check that the coolant flows steadily through the fed channels and that the drill produces a consistent 20.00 mm hole diameter without excessive vibration or overheating.
What comes with the 2XDCR7874A drill and what must I supply separately?
The package includes the Twister Xd 5X coolant-fed drill body only; you must provide a compatible tool holder, coolant supply system and appropriate workholding for your machine.
Which version of the M.A. Ford Twister Xd 5X should I choose for a 20.00 mm hole?
Select the 2XDCR7874A model, which is specified for a 20.00 mm cutting diameter and 5×D drilling depth with internal coolant feed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
