M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 19.50mm
Coolant-fed drill bit creates 19.50 mm holes with five-times diameter drilling depth
- Coolant-fed design clears chips efficiently for deeper holes
- 5× diameter reach extends drilling capacity in one pass
- 50 mm cutting diameter suits precise metric bores
- Twister Xd geometry reduces thrust force and heat buildup
- California Proposition 65 notice flags regulated chemical content
M.A. Ford Twister Xd 5X Coolant Fed Drill
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a precision cutting tool designed for professional machining applications. Its 19.50mm diameter suits operations requiring this specific bore size. The integrated coolant feed delivers fluid directly to the cutting zone for improved chip evacuation and tool life. This new drill targets machinists and fabricators working with demanding materials.
19.50mm Diameter Capacity and Headroom
The 19.50mm cutting diameter defines the hole size this drill produces in a single pass. It comfortably handles medium-duty production runs where consistent hole tolerance is required. The 5X length-to-diameter ratio provides extended reach for deeper holes without pecking cycles. The tool runs out when hole depths exceed this reach or when diameters larger than 19.50mm are needed.
Coolant-Fed Build and Shank Implications
The coolant-fed design channels lubricant through the tool body to the cutting edges reducing heat buildup. This construction supports higher cutting speeds and prolongs edge sharpness in tough alloys. The shank configuration fits standard tool holders for quick changeovers on CNC machines. California Proposition 65 warnings indicate the presence of chemicals linked to cancer and reproductive harm requiring safe handling practices.
Highlights
- Coolant-fed design clears chips efficiently for deeper holes
- 5× diameter reach extends drilling capacity in one pass
- 50 mm cutting diameter suits precise metric bores
- Twister Xd geometry reduces thrust force and heat buildup
- California Proposition 65 notice flags regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Will the 19.50 mm Twister Xd 5X fit the same tool holder and coolant feed as my current M.A. Ford 5X drills?
The 19.50 mm shank and coolant-fed design follow the Twister Xd 5X series specification, so it matches existing M.A. Ford 5X holders and through-coolant connections.
How can I verify the 2XDCR7677A is delivering coolant correctly once installed?
Start the machine at low pressure, observe steady flow from the drill tip, then confirm consistent chip evacuation and hole quality at the rated 5X depth.
Does the box include only the 19.50 mm drill or are collets and coolant adapters also supplied?
The package contains the 2XDCR7677A Twister Xd 5X drill; collets, holders and coolant adapters are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
