M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 18.50mm
Coolant-fed 18.50 mm drill delivers 5x diameter depth in a single pass
- 5x coolant-fed drilling depth for efficient chip removal
- 50 mm diameter for precise hole sizing
- M.A. Ford brand for professional-grade tool reliability
- Twister Xd series designed for high-performance drilling applications
- California Proposition 65 warning for chemical safety awareness
Twister Xd 5X Coolant-Fed Drill 18.50mm
The M.A. Ford Twister Xd 5X is a solid-carbide drill designed for high-performance holemaking with internal coolant delivery. Its 18.50 mm diameter and 5× diameter drilling depth suit production environments that require precise, deep holes in a single pass.
For CNC shops drilling deep holes in tough alloys
Machinists running CNC machining centres with through-spindle coolant will benefit from the chip evacuation and tool life this design provides. Operations limited to external coolant supply or hand-held drilling cannot use the internal coolant channel effectively.
18.50 mm diameter with 5× depth capability
The drill comfortably handles depths up to five times its diameter in steels, stainless steels and high-temperature alloys where coolant pressure clears chips from the flute. It reaches its limit in very deep-hole applications beyond that ratio or in machines without adequate coolant pressure and filtration.
Highlights
- 5x coolant-fed drilling depth for efficient chip removal
- 50 mm diameter for precise hole sizing
- M.A. Ford brand for professional-grade tool reliability
- Twister Xd series designed for high-performance drilling applications
- California Proposition 65 warning for chemical safety awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle and coolant system do I need to run this 18.50 mm Twister Xd 5X drill?
The drill requires a machine spindle that accepts its shank and a coolant-through spindle capable of delivering fluid through the tool at the pressure your machining parameters demand.
Can I use this 18.50 mm coolant-fed drill in a setup that currently runs non-coolant drills?
Only if the machine has a through-spindle coolant delivery system; without it the internal coolant channels cannot function and the drill will not perform as designed.
How do I confirm the 2XDCR7283A drill is cutting correctly after installation?
Verify that coolant exits the drill point steadily, listen for a consistent cutting sound, and check that the finished hole measures 18.50 mm with the expected surface finish.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
