M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 16.30 mm 2XDCR6417A
A 16.30 mm coolant-fed drill designed for five-times-diameter depth capability
- Coolant-fed design clears chips efficiently during deep drilling
- 5× diameter reach handles long holes in a single pass
- 30 mm cutting diameter suits precise metalwork
- Twister Xd geometry reduces thrust for smoother cuts
- M.A. Ford manufacturing ensures professional-grade reliability
Twister Xd 5X Coolant Fed Drill
The M.A. Ford Twister Xd 5X is a coolant-fed drill designed for precision hole-making in demanding materials. It targets machinists and maintenance teams who require controlled chip evacuation and extended tool life during deep drilling operations.
16.30 mm diameter and coolant feed
The 16.30 mm cutting diameter defines the hole size this tool produces. The internal coolant channels deliver fluid directly to the cutting zone, which improves chip removal and reduces heat buildup compared with non-coolant drills.
Check machine coolant capability and holder fit
Verify that your machine spindle and tool holder support through-coolant delivery at the required pressure. Confirm the shank style matches your holder interface and that the 16.30 mm size suits the hole tolerance your application demands.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 5× diameter reach handles long holes in a single pass
- 30 mm cutting diameter suits precise metalwork
- Twister Xd geometry reduces thrust for smoother cuts
- M.A. Ford manufacturing ensures professional-grade reliability
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often will the 16.30 mm cutting edges need resharpening?
Resharpening interval depends on the workpiece material and feed rate; monitor flank wear and regrind before the margin width drops below the manufacturer's minimum.
What limits continuous drilling depth with the 5X design?
The 5X diameter-to-length ratio sets the maximum single-pass depth; chip evacuation and coolant flow become the practical limits beyond that.
How much heat builds up in the shank during all-day CNC cycles?
Through-tool coolant at the 16.30 mm diameter removes heat at the cutting zone; shank temperature stays near coolant temperature if flow and pressure are maintained.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
