M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 15.70 mm 6181A
Coolant-fed carbide drill delivers 5× diameter depth at 15.70 mm for high-efficiency production drilling
- Coolant-fed design clears chips efficiently during deep drilling
- 5× diameter reach handles 15.70 mm holes in one pass
- Twister XD geometry reduces thrust force for smoother cuts
- M.A. Ford construction delivers consistent performance in tough materials
- California Proposition 65 notice included for regulated substances awareness
M.A. Ford Twister Xd 5X Drill 15.70 mm
The M.A. Ford Twister Xd 5X is a coolant-fed drill designed for producing accurate holes up to five times the diameter in depth. It suits workshops and production cells that require a single tool for deeper drilling cycles in metal components.
Suited for deep-hole drilling in metal
This drill serves machinists who need extended reach with internal coolant delivery for chip evacuation and temperature control. It is not intended for hand-held use, shallow-hole spotting, or applications that require a non-coolant geometry.
15.70 mm cutting diameter
The 15.70 mm diameter determines the hole size this tool will produce and must match the required bore specification exactly. Verify the machine spindle can accommodate the shank and that the coolant system provides adequate flow for the 5X depth ratio.
Highlights
- Coolant-fed design clears chips efficiently during deep drilling
- 5× diameter reach handles 15.70 mm holes in one pass
- Twister XD geometry reduces thrust force for smoother cuts
- M.A. Ford construction delivers consistent performance in tough materials
- California Proposition 65 notice included for regulated substances awareness
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Which Twister Xd drill diameter should I select for a 15.70 mm hole?
Choose the 15.70 mm variant; the part number 2XDCR6181A corresponds to that exact cutting diameter.
How does the 5X coolant-fed design perform in a CNC machine?
The 5X length-to-diameter ratio with internal coolant delivery supports deep-hole drilling up to five times the 15.70 mm diameter while evacuating chips through the tool.
What shank standard does the 6181 series use and what does it limit?
The drill uses a standard cylindrical shank that fits common ER collets or Weldon holders, limiting maximum run-out to the holder's tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
