M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 15.50 mm 2XDCR6102A
A 15.50 mm coolant-fed drill with 5× diameter depth capability for deep-hole drilling
- Coolant-fed design improves chip evacuation during deep drilling
- 5× diameter reach enables deeper holes in a single pass
- 50 mm cutting diameter suits precise hole sizing
- Twister XD geometry enhances tool life in tough materials
- California Proposition 65 warning informs safe handling practices
Twister XD 5X coolant-fed drill
The M.A. Ford Twister XD 5X is a coolant-fed drill with a 15.50 mm cutting diameter. It is built for high-efficiency hole making in production environments where through-tool coolant delivery improves chip evacuation and tool life.
Suited for CNC operations needing 5×D depth
This drill serves machinists running CNC centres that support through-spindle coolant at the required pressure. It is not for manual drilling, machines without coolant-through capability, or applications needing a different diameter or length-to-diameter ratio.
Fits toolholders matching the shank specification
The drill mounts in a compatible toolholder and relies on the machine’s coolant system to feed fluid through its internal channels. That integration removes the need for external coolant aiming and frees up space around the workpiece for fixturing or multi-axis movement.
Highlights
- Coolant-fed design improves chip evacuation during deep drilling
- 5× diameter reach enables deeper holes in a single pass
- 50 mm cutting diameter suits precise hole sizing
- Twister XD geometry enhances tool life in tough materials
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What spindle interface does the Twister XD 5X drill with part number 2XDCR6102A require?
The drill is a 15.50 mm coolant-fed tool designed for machine spindles that accept a 15.50 mm shank with internal coolant delivery.
Can the 15.50 mm Twister XD 5X drill be used in a holder that only supports external flood coolant?
The tool is built for through-spindle coolant feed; external flood alone will not deliver coolant through the internal channels.
How can I confirm the 2XDCR6102A drill is delivering coolant correctly after installation?
Run the spindle at low speed with coolant on and verify a steady stream exits the drill’s coolant holes at the cutting edges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
