M.A. Ford
M.A. Ford Twister XD 5X Coolant Fed Drill 13.50mm 2XDCR5315A
Coolant-fed 5×D drill cuts 13.50 mm holes with through-tool lubrication
- Twister XD design delivers 5× diameter drilling depth
- Coolant-fed operation clears chips for cleaner holes
- 50 mm diameter suits precise metalwork
- M.A. Ford quality built for professional use
- California Proposition 65 warning applies to this item
M.A. Ford Twister XD 5X Coolant Fed Drill 13.50mm
The M.A. Ford Twister XD 5X Coolant Fed Drill is a precision cutting tool manufactured by M.A. Ford. It features a 13.50mm diameter and is designed with internal coolant channels. This drill targets professional machinists and industrial maintenance teams who require efficient chip evacuation in deep-hole drilling applications. The 2XDCR5315A model supports high-performance drilling in a variety of ferrous and non-ferrous materials.
Suited for CNC machines
This drill suits operators running CNC machining centres equipped with through-spindle coolant delivery at sufficient pressure. It is not for buyers who lack coolant-fed spindle infrastructure or who need a solid carbide drill for dry machining. Shops without high-pressure coolant systems should look at alternative tooling designed for external flood coolant or dry cutting conditions.
13.50mm diameter with 5X diameter flute length
The defining specification is the 13.50mm cutting diameter combined with a 5X diameter flute length for deep-hole reach. This geometry dictates the maximum drilling depth achievable in a single pass without pecking. Verify that your machine spindle and holder accommodate this specific diameter and overall length before purchase. The tool carries a California Proposition 65 warning regarding chemical exposure.
Highlights
- Twister XD design delivers 5× diameter drilling depth
- Coolant-fed operation clears chips for cleaner holes
- 50 mm diameter suits precise metalwork
- M.A. Ford quality built for professional use
- California Proposition 65 warning applies to this item
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle is required for the 13.50 mm Twister XD 5X coolant-fed drill?
The drill has a 13.50 mm cutting diameter and a coolant-fed design, so it must be run in a CNC or milling machine spindle that accepts a 13.50 mm shank and provides internal coolant delivery at the required pressure.
Can the Twister XD 5X drill be used with a standard external-coolant tool holder?
No, the drill is built for through-tool coolant feed; using it in a holder without internal coolant passages will starve the cutting zone of coolant and prevent the drill from performing as designed.
How can I verify the Twister XD 5X drill is operating correctly after installation?
Confirm that coolant flows visibly through the drill’s internal channels at spindle start-up, then check that the first hole measures 13.50 mm diameter with a clean, round finish and no chatter marks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
