M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 13.00Mm 2XDCR5118A
Five-times-diameter coolant-fed drill bit cuts 13.00 mm holes with through-tool lubrication
- 00 mm diameter suits precise holes
- 5× coolant-fed design clears chips efficiently
- Twister XD geometry reduces cutting forces
- M.A. Ford quality ensures reliable performance
- California Prop 65 warning informs safe handling
M.A. Ford Twister Xd Drill
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a 13.00 mm cutting tool built for professional machining environments. It targets metalworking shops and maintenance teams that require reliable hole production in tough alloys. The coolant-fed design supports extended tool life and consistent chip evacuation. This item ships directly from the manufacturer in new condition.
Coolant-Fed Drilling Constraints
Coolant-fed operation demands a machine spindle and holder capable of delivering pressurised fluid through the tool body. Without that infrastructure the internal channels cannot function and the drill reverts to external flood cooling only. Shops lacking through-spindle coolant capability will not gain the full chip-control benefit. The 5X diameter-to-depth ratio also requires rigid workholding to prevent deflection.
13.00 mm Diameter Decides Fit
The 13.00 mm cutting diameter is the single specification that determines whether this drill matches the required hole size. Select it only when the drawing or process sheet calls for that exact nominal diameter. A different diameter will not satisfy the tolerance or the downstream tapping and fitting operations. Verify the target size before ordering.
Highlights
- 00 mm diameter suits precise holes
- 5× coolant-fed design clears chips efficiently
- Twister XD geometry reduces cutting forces
- M.A. Ford quality ensures reliable performance
- California Prop 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What does the 5X in the Twister Xd 5X Coolant Fed Drill mean for my drilling depth?
The 5X designation indicates this drill can reach a depth of five times its 13.00 mm diameter, giving you a maximum drilling depth of 65 mm in a single pass.
How does the 13.00 mm diameter perform in a real machine setup?
In a real machine, the 13.00 mm diameter provides a precise hole size for standard metric fasteners and fits common tool holders without needing oversized collets or adapters.
What interface does the Twister Xd use and what does it limit?
The drill uses a standard cylindrical shank interface, which limits you to tool holders that accept round shanks such as collet chucks, end-mill holders, or hydraulic chucks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
