M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 12.90mm 2XDCR5079A
A 12.90 mm coolant-fed drill designed for five-times-diameter drilling depth
- 90 mm diameter suits precise hole-making
- 5× coolant-fed design improves chip evacuation
- Twister Xd geometry extends tool life
- M.A. Ford quality backs professional use
- California Proposition 65 warning applies
M.A. Ford Twister Xd 5X Coolant Fed Drill 12.90mm
The M.A. Ford Twister Xd 5X Coolant Fed Drill is a 12.90mm cutting tool designed for high-performance drilling operations. It features internal coolant delivery to improve chip evacuation and extend tool life in demanding materials. This drill targets professional machinists and manufacturing shops that require precise, deep-hole capability. The 5X diameter length supports efficient production in a single pass.
Suited for coolant-fed CNC applications needing 5X
This drill suits operators running CNC machines with through-spindle coolant who need a 12.90mm diameter and 5X depth-to-diameter ratio. It is not for buyers who need a different diameter, a shorter or longer flute length, or a non-coolant-fed design. Shops without high-pressure coolant systems should look at alternative tooling. The California Proposition 65 notice also applies for regulatory awareness.
12.90mm diameter with 5X coolant-fed design
The single specification that decides fit is the 12.90mm diameter combined with the 5X coolant-fed configuration. This exact size and length ratio must match the hole requirement and machine capability. Verify the spindle interface and coolant pressure before purchase. The manufacturer part number 2XDCR5079A confirms the specific geometry.
Highlights
- 90 mm diameter suits precise hole-making
- 5× coolant-fed design improves chip evacuation
- Twister Xd geometry extends tool life
- M.A. Ford quality backs professional use
- California Proposition 65 warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the M.A. Ford Twister Xd 5X Coolant Fed Drill 12.90mm include any accessories or only the drill bit?
The product listing specifies the M.A. Ford 2XDCR5079A Twister Xd 5X Coolant Fed Drill in 12.90mm diameter.
How do I choose between the available versions of the Twister Xd 5X Coolant Fed Drill?
The item is identified by part number 2XDCR5079A with a 12.90mm cutting diameter and 5X length-to-diameter ratio. No alternative diameters, lengths, or coating options are listed for selection.
What does the 5X designation mean for drilling performance in a CNC machine?
The 5X indicates a flute length five times the 12.90mm diameter, providing deeper hole capability in a single pass. Coolant-fed design delivers fluid directly to the cutting zone for chip evacuation and heat reduction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
