M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 12.83Mm
A 12.83 mm coolant-fed drill delivering five-times-diameter depth capability
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for smoother cutting
- 83 mm diameter suits precise hole sizing
- M.A. Ford quality backs professional workshop use
- California Proposition 65 warning informs safe handling
Application and user
The M.A. Ford Twister Xd 5X Coolant Fed Drill in 12.83 mm diameter is built for machinists who need a single tool that drills five times its diameter with internal coolant delivery. It suits CNC and high-volume production where chip evacuation and hole straightness are critical.
Thermals, noise and power
Internal coolant channels carry fluid directly to the cutting zone, controlling heat at the drill point and flushing chips without external flooding. The design reduces thermal buildup on the workpiece and tool, letting the spindle run at target speeds with less acoustic signature than flood-cooled alternatives.
Deciding specification
The 12.83 mm cutting diameter combined with a 5× depth capability and coolant-fed geometry determines whether this drill matches the hole size and depth your process requires. Buyers needing a different diameter, a non-coolant variant or a shorter length-to-diameter ratio should select another tool.
Highlights
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for smoother cutting
- 83 mm diameter suits precise hole sizing
- M.A. Ford quality backs professional workshop use
- California Proposition 65 warning informs safe handling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 12.83 mm Twister Xd 5X coolant-fed drill and what step is often missed?
Mount the 12.83 mm shank in a hydraulic or shrink-fit holder, run true, and connect and pressure-test the through-coolant supply before cutting.
What maintenance or replacement will the Twister Xd 5X drill need later?
The solid-carbide 12.83 mm drill will eventually need regrinding or replacement once the cutting edges wear beyond the geometry tolerance.
What limit appears first on the 12.83 mm Twister Xd 5X under sustained use?
The 5× diameter flute length restricts chip evacuation in deep holes, so heat buildup and chip packing become the limiting factor during prolonged drilling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
