M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 12.80Mm
A coolant-fed drill bit with 5x diameter depth capacity for 12.80 mm holes
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 80 mm diameter suits precise drilling tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning informs safe handling practices
Twister Xd 5X Coolant Fed Drill
The M.A. Ford Twister Xd 5X is a coolant fed drill with a 12.80 mm diameter. It is built for production environments that need through tool coolant delivery. The design targets operators drilling deep holes in tough materials. It suits shops running high performance drilling cycles.
Check spindle coolant capability
Verify that your machine spindle and holder support through coolant delivery before ordering. The tool requires a compatible coolant fed holder or spindle interface to function correctly. Ensure your existing setup can supply coolant at the pressure your application demands. Without this the drill cannot operate as intended.
Carbide construction with coolant channels
The solid carbide body incorporates internal coolant channels for direct fluid delivery to the cutting zone. This construction resists wear and helps manage heat during extended cuts. The shank fits standard holders matching the tool diameter. Daily use benefits from consistent chip evacuation and reduced cycle times.
Highlights
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 80 mm diameter suits precise drilling tasks
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
Does the 12.80 mm Twister Xd drill come with coolant fittings or must they be purchased separately?
The drill is sold as the cutting tool only; coolant delivery fittings and supply hardware are not included and must be sourced separately.
What distinguishes the 5X coolant-fed version identified by 2XDCR5039A from other Twister Xd drills?
The 5X designation indicates a five-times-diameter flute length with internal coolant channels, while the 2XDCR5039A part number confirms the 12.80 mm diameter and coolant-fed design.
How does the 12.80 mm diameter affect hole size when the drill is used in a CNC machine?
The drill will produce a nominal 12.80 mm hole; actual tolerance depends on machine rigidity, coolant pressure and workpiece material.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
