M.A. Ford
M.A. Ford Twister XD 5X Coolant-Fed Drill 12.10 mm
Twister XD 5X coolant-fed drill bores 12.10 mm holes with internal lubrication
- Twister XD design drills five times diameter depth
- 10 mm diameter suits precise hole sizing
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning indicates regulated chemical content
Twister XD 5X Coolant-Fed Drill 12.10 mm
This Twister XD 5X Coolant-Fed Drill from M.A. Ford is built for machining operations that demand precise holemaking with internal coolant delivery. It serves professionals in metalworking shops who need a reliable 12.10 mm cutting tool for production drilling tasks.
Thermals, noise and power draw
The drill’s coolant-fed design channels fluid directly to the cutting zone, helping manage heat during extended cycles. Because the tool itself has no motor or electronics, it produces no operational noise and draws no electrical power; those factors depend entirely on the machine spindle and coolant system it is mounted in.
Build integration and clearance
The 12.10 mm diameter determines the hole size it creates and the toolholder capacity required. Internal coolant passages mean the machine must supply pressurised coolant through the spindle, freeing the operator from external flood arrangements. Buyers without through-spindle coolant capability or who need a different diameter cannot use this tool as specified.
Highlights
- Twister XD design drills five times diameter depth
- 10 mm diameter suits precise hole sizing
- Coolant-fed operation improves chip evacuation and tool life
- M.A. Ford manufacturing ensures professional-grade reliability
- California Proposition 65 warning indicates regulated chemical content
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How do I install the 12.10 mm Twister XD 5X coolant-fed drill in my machine?
Clamp the cylindrical shank in a precision hydraulic or shrink-fit holder, align the internal coolant ports with the spindle through-coolant supply, and torque to the holder manufacturer’s specification — do not use a side-lock flat as the drill has none.
What maintenance will the 12.10 mm Twister XD 5X drill need during its service life?
Inspect the cutting edges and margin wear at each tool change; recondition the point geometry on a CNC grinder when flank wear becomes visible, and verify the coolant holes remain clear of swarf after every deep-hole cycle.
What limit appears first when running the 12.10 mm Twister XD 5X drill continuously at 5×D depth?
Chip evacuation through the 12.10 mm flutes typically becomes the bottleneck before thermal stress, so monitor for packing that spikes thrust force and reduces coolant effectiveness at full depth.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
