M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 12.00 mm 2XDCR4724A
A 12.00 mm coolant-fed drill designed for five-times-diameter depth drilling
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm diameter suits precise machining tasks
- M.A. Ford manufacturing delivers reliable cutting performance
- California Proposition 65 warning informs safe handling practices
M.A. Ford Twister Xd 12 mm Drill
The M.A. Ford Twister Xd 12.00 mm drill is a coolant-fed cutting tool designed for production drilling. It suits machine shops and fabricators who need consistent hole quality in steel and alloy materials. The 5X diameter flute length supports deeper holes in a single pass.
Coolant-fed design for CNC tooling
Internal coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and tool life. This design reduces the need for external flood coolant and helps maintain dimensional accuracy during extended cycles. It fits standard tool holders compatible with through-spindle coolant systems.
Replaces standard 5xD drills without through-coolant
The Twister Xd upgrades from conventional solid drills that rely on external cooling. The jump is worthwhile when cycle times are long, materials are difficult to machine, or chip packing causes premature wear. Proposition 65 warnings apply for California users.
Highlights
- Twister Xd design drills five times diameter depth
- Coolant-fed operation clears chips for cleaner holes
- 00 mm diameter suits precise machining tasks
- M.A. Ford manufacturing delivers reliable cutting performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What coolant pressure limit appears first during extended drilling with the 12.00 mm Twister Xd 5X?
The drill is designed for through-coolant delivery; sustained pressure beyond the machine spindle's rated seal limit will show as leakage before the tool itself fails.
How much heat and noise does the 2XDCR4724A generate in continuous operation?
Heat builds in the workpiece and coolant stream rather than the drill body; noise level matches the spindle speed and material, not the drill design.
What existing equipment must I have to run this coolant-fed drill?
A machine spindle with through-coolant capability and a sealed tool holder that accepts a 12.00 mm shank are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
