M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 11.60mm 2XDCR4567A
Coolant-fed drill with 5× diameter depth drills 11.60 mm holes efficiently
- 5x coolant-fed drilling depth for efficient chip removal
- 60 mm diameter suits precise hole sizing
- M.A. Ford construction delivers professional-grade durability
- New condition ensures full factory performance
- California Prop 65 notice informs safe handling practices
11.60 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 5X is a solid-carbide drill with an 11.60 mm diameter and internal coolant channels. It is built for high-performance drilling in steel, stainless steel and high-temperature alloys where through-tool coolant improves chip evacuation and tool life. The 5× diameter flute length suits production holes up to five times the drill diameter.
Suited for CNC production runs with coolant
Machinists running CNC mills or lathes equipped with through-spindle coolant will gain the full benefit of the internal feed. Shops without coolant capability or those drilling only occasional holes in soft materials will not use the drill as intended and should consider a standard external-coolant or solid drill instead.
Verify machine coolant and holder fit
Confirm that your machine delivers coolant through the spindle at the pressure and flow the tool requires. Check that the tool holder accepts the drill shank and that the work envelope allows the full 5× length without interference. Ensure the workpiece material matches the drill’s recommended application range.
Highlights
- 5x coolant-fed drilling depth for efficient chip removal
- 60 mm diameter suits precise hole sizing
- M.A. Ford construction delivers professional-grade durability
- New condition ensures full factory performance
- California Prop 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What machine spindle is required to run the 11.60 mm Twister Xd 5X coolant-fed drill?
The drill has a straight shank that fits standard ER collets or Weldon holders on any CNC machining centre or rigid milling machine with through-spindle coolant.
Can the 2XDCR4567A be used on a manual drill press that only offers flood coolant?
It is designed for high-pressure through-tool coolant; flood coolant will not deliver the chip evacuation the 5×D geometry expects, so tool life will drop sharply.
How do I confirm the 11.60 mm drill is cutting correctly after the first hole?
Measure the hole diameter and check for a consistent 11.60 mm size, smooth finish, and no blue discoloration on the flutes — these show coolant is reaching the tip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
