M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 11.30mm 2XDCR4449A
Coolant-fed drill cuts 11.30 mm holes at five times diameter for deep drilling
- Coolant-fed design improves chip evacuation and tool life
- 30 mm diameter suits precise hole-making applications
- Twister Xd 5X geometry optimises drilling performance
- M.A. Ford brand signals professional-grade cutting tool quality
- California Proposition 65 notice informs safe handling practices
Twister Xd 5X coolant-fed drill
The M.A. Ford Twister Xd 5X coolant-fed drill is a solid-carbide cutting tool designed for high-performance drilling in demanding materials. Its integrated coolant channels deliver fluid directly to the cutting zone, improving chip evacuation and tool life. This drill suits production environments that require consistent hole quality at elevated speeds. It is supplied new and ships directly from the manufacturer.
CNC shops needing through-coolant capability
The drill targets CNC operators who need reliable 5×D depth performance with internal coolant feed on materials such as steels, stainless alloys and high-temperature metals. Buyers without through-spindle coolant capability or who require a different diameter should look at alternative tooling. The Proposition 65 notice indicates the product contains chemicals listed by California as carcinogenic and reproductive toxins.
11.30 mm cutting diameter
The single specification that determines fit is the 11.30 mm cutting diameter, which must match the hole size required by the application. The 5×D length ratio and coolant-fed design support deep-hole drilling in a single pass when the machine provides adequate coolant pressure. Verify holder compatibility and machine coolant delivery before purchase.
Highlights
- Coolant-fed design improves chip evacuation and tool life
- 30 mm diameter suits precise hole-making applications
- Twister Xd 5X geometry optimises drilling performance
- M.A. Ford brand signals professional-grade cutting tool quality
- California Proposition 65 notice informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
How often should the Twister Xd 5X coolant fed drill be resharpened or replaced?
Resharpen when cutting edges dull; replace if the shank shows wear or the coolant hole becomes obstructed.
What limits continuous drilling depth with the 11.30 mm Twister Xd 5X?
The 5X diameter design targets holes up to five times the drill diameter; chip packing and coolant flow become the practical limits beyond that.
Does the 2XDCR4449A drill generate noticeable heat or noise during all-day CNC runs?
Heat and noise depend on spindle speed, feed rate and coolant delivery; the through-tool coolant channel is designed to reduce thermal buildup during extended cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
