M.A. Ford
M.A. Ford Twister Xd 5X Coolant Fed Drill 10.90 mm
A 10.90 mm coolant-fed drill designed for efficient chip evacuation and extended tool life
- 5x coolant-fed drilling for deep-hole chip evacuation
- 90 mm diameter for precise hole sizing
- Twister XD geometry engineered for hard-material cutting
- M.A. Ford manufacturing quality for professional reliability
- California Proposition 65 chemical warning applies
M.A. Ford Twister Xd 10.90 mm Coolant-Fed Drill
The M.A. Ford Twister Xd 10.90 mm is a solid-carbide coolant-fed drill designed for 5× diameter depth-to-diameter drilling. It targets machine shops and production lines that require precise deep-hole capability in steel, stainless steel, cast iron and high-temperature alloys.
Who this suits and who should look elsewhere
This drill suits CNC operators who have through-spindle coolant and need a single tool for 5×D holes in tough materials. It is not for manual drilling, for machines without coolant delivery, or for applications requiring a different diameter or a longer reach than 5×D.
Diameter 10.90 mm and 5×D depth
The 10.90 mm cutting diameter and 5×D flute length are the decisive specifications; they fix the hole size and maximum drill depth in one pass. Verify that your machine provides the coolant pressure and spindle speed recommended for this diameter before ordering.
Highlights
- 5x coolant-fed drilling for deep-hole chip evacuation
- 90 mm diameter for precise hole sizing
- Twister XD geometry engineered for hard-material cutting
- M.A. Ford manufacturing quality for professional reliability
- California Proposition 65 chemical warning applies
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What shank diameter does the 10.90 mm Twister Xd 5X drill require in the holder?
The drill has a 10.90 mm cutting diameter, so the holder must accept a 10.90 mm shank for a secure fit.
How do I connect coolant to the 2XDCR4291A drill and what step is often missed?
Feed coolant through the tool's internal channels; the step often missed is verifying that the machine's coolant port aligns with the drill's inlet before starting.
When should I replace the 10.90 mm Twister Xd 5X drill?
Replace the drill when the cutting edges show visible wear, chipping, or when hole quality and dimensional accuracy fall below your required tolerance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
